User's Manual

CNR-CPO-8500T Patient Observer
Page 46
 Power Saving Function(ERP) [Disabled]
Use the Power Saving Function(ERP) BIOS option to enable or disable the power
saving function.

Disabled D EFAULT Power saving function is disabled.

Enabled Power saving function is enabled. It will reduce power
consumption when the system is off.
 USB Power SW1 [+5V DUAL]
Use the USB Power SW1 BIOS option to configure whether to provide power to the four
external USB 3.1 Gen 1 connectors when the system is in S3/S4 sleep state. This option
is valid only when the above Power Saving Function (ERP) BIOS option is disabled.

+5V
DUAL
D EFAULT Power is provided to the external USB 3.1 Gen 1
connectors when the system is in S3/S4 sleep state

+5V Power is not provided to the external USB 3.1 Gen 1
connectors when the system is in S3/S4 sleep state