User's Manual
TRN-TABLET3
Page 25
4.3.2 SATA Configuration
Use the SATA Configuration menu (434H514H810HBIOS Menu 4) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
M2_M1 Slot M.2 (S80) 3MG2 (496.1GB)
Enable/Disable SATA
Device.
---------------------
àß
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 4: SATA Configuration
è SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the SATA controller(s).
è
Enabled DEFAULT Enables the on-board SATA controller(s).
è
Disabled Disables the on-board SATA controller(s).
è SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to determine how SATA devices operate.
è
AHCI DEFAULT Configures SATA devices as AHCI device.
PDF created with pdfFactory Pro trial version www.pdffactory.com