User's Manual

TRN-TABLET3
Page 30
The following options can only be set if the CPU/SYS Smart Fan Control option is set to
Auto Mode.
è Auto mode fan start temperature
If the CPU temperature is between fan off and fan start, the fan speed change to fan
start PWM. To set a value, Use the + or – key to change the value or enter a decimal
number between 1 and 100.
è Auto mode fan off temperature
If the CPU temperature is lower than the value set this option, the fan speed change to be
lowest. To set a value, Use the + or – key to change the value or enter a decimal number
between 1 and 100.
è Auto mode fan start PWM
Use the Auto mode fan start PWM option to set the PWM start value. Use the + or – key
to change the value or enter a decimal number between 1 and 100.
è Auto mode fan slope PWM
Use the Auto mode fan slope PWM option to select the linear rate at which the PWM
mode increases with respect to an increase in temperature. Use the + or – key to change
the value or enter a decimal number between 1 and 8.
PDF created with pdfFactory Pro trial version www.pdffactory.com