Safety Information

www.tuv.com
Page 2 of 59
Report No.: 50261218 001
Disclaimer: This document is controlled and has been released electronically.
Only the version on the IECEE Website is the current document version
TEST REPORT
IEC 60950-1
Information technology equipment – Safety –
Part 1: General requirements
Report Number........................... :
50261218 001
Date of issue.............................. :
See cover page
Total number of pages.................
See cover page
Name of Testing Laboratory
preparing the Report .................. :
See cover page
Applicant’s name ....................... :
See cover page
Address..................................... :
See cover page
Test specification:
Standard.................................... :
See cover page
Test procedure........................... :
See cover page
Non-standard test method………..:
N/A
Test Report Form No. ................. :
IEC60950_1G
Test Report Form(s) Originator ... :
SGS Fimko Ltd
Master TRF ................................ :
Dated 2019-07-02
Copyright © 2019 IEC System of Conformity Assessment Schemes for Electrotechnical
Equipment and Components (IECEE System). All rights reserved.
This publication may be reproduced in whole
or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resul ting
from the reader's interpretation of the reprod
uced material due to its placement and context.
If this Test Report Form is used by non
-
IECEE members, the IECEE/IEC logo and the reference to the
CB Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.