Safety Information

www.tuv.com
Page 21 of 59
Report No.: 50261218 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1G
Rated current (A), type, nominal thread diameter
(mm) ............................................................:
¾
3.3.6
Wiring terminal design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8
Stranded wire
N/A
3.4
Disconnection from the mains supply
P
3.4.1
General requirement
See below.
P
3.4.2
Disconnect devices
Mains plug
P
3.4.3
Permanently connected equipment
Not permanently connected
equipment.
N/A
3.4.4
Parts which remain energized
When AC plug is disconnected
no hazardous voltage in the
equipment.
P
3.4.5
Switches in flexible cords
None
N/A
3.4.6
Number of poles – single-phase and d.c.
equipment
Mains plug disconnects both
poles simultaneously.
P
3.4.7
Number of poles – three-phase equipment
Single phase equipment.
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10
Interconnected equipment
Not interconnected equipment.
N/A
3.4.11
Multiple power sources
Only one supply connection
provided.
N/A
3.5
Interconnection of equipment
P
3.5.1
General requirements
This power supply is not
considered for connection to
TNV.
P
3.5.2
Types of interconnection circuits .......................:
Interconnection circuits of
SELV through the connector.
No ELV i
nterconnection
circuits.
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnection
N/A
3.5.4
Data ports for additional equipment
No such ports
N/A
4
PHYSICAL REQUIREMENTS
P
4.1
Stability
N/A
Angle of 10
°
Direct plug-in type adaptor
N/A
Test force (N) ................................................. :
N/A