Safety Information

www.tuv.com
Page 31 of 59
Report No.: 50261218 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1G
Manufacturer ................................................ :
See table 1.5.1
¾
Type ............................................................ :
See table 1.5.1
¾
Rated values ................................................ :
See table 1.5.1
¾
Method of protection .......................................:
By protection circuit
¾
C.1
Overload test
(see appended table 5.3)
P
C.2
Insulation
(see appended tables 5.2 and
C.2)
P
Protection from displacement of windings...........:
By bobbin and insulation tape
P
D
ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS
(see 5.1.4)
P
D.1
Measuring instrument
P
D.2
Alternative measuring instrument
N/A
E
ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13)
N/A
F
ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES
(see 2.10 and Annex G)
P
G
ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
N/A
G.1
Clearances
N/A
G.1.1
General
N/A
G.1.2
Summary of the procedure for determining
minimum clearances
N/A
G.2
Determination of mains transient voltage (V)
N/A
G.2.1
AC mains supply ........................................... :
N/A
G.2.2
Earthed d.c. mains supplies ............................ :
N/A
G.2.3
Unearthed d.c. mains supplies ......................... :
N/A
G.2.4
Battery operation ........................................... :
N/A
G.3
Determination of telecommunication network
transient voltage (V) ..................................... :
N/A
G.4
Determination of required withstand voltage (V)
N/A
G.4.1
Mains transients and internal repetitive peaks .... :
N/A
G.4.2
Transients from telecommunication networks ..... :
N/A
G.4.3
Combination of transients
N/A
G.4.4
Transients from cable distribution systems
N/A
G.5
Measurement of transient voltages (V)
N/A