Safety Information

www.tuv.com
Page 33 of 59
Report No.: 50261218 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1G
M.3.1.2
Voltage (V) ................................................... :
¾
M.3.1.3
Cadence; time (s), voltage (V) ......................... :
¾
M.3.1.4
Single fault current (Ma) ................................. :
¾
M.3.2
Tripping device and monitoring voltage ............. :
N/A
M.3.2.1
Conditions for use of a tripping device or a
monitoring voltage
N/A
M.3.2.2
Tripping device
N/A
M.3.2.3
Monitoring voltage (V) .................................... :
N/A
N
ANNEX N, IMPULSE TEST GENERATORS (see 1.5.7.2, 1.5.7.3, 2.10.3.9, 6.2.2.1,
7.3.2, 7.4.3 and Clause G.5)
N/A
N.1
ITU-T impulse test generators
N/A
N.2
IEC 60065 impulse test generator
N/A
P
ANNEX P, NORMATIVE REFERENCES
¾
Q
ANNEX Q, Voltage dependent resistors (VDRs) (see 1.5.9.1)
P
- Preferred climatic categories ......................... :
(see appended table 1.5.1)
P
- Maximum continuous voltage ........................ :
(see appended table 1.5.1)
P
- Combination pulse current ............................ :
(see appended table 1.5.1)
P
Body of the VDR
Test according to IEC60695-11-5.........................:
N/A
Body of the VDR.
Flammability class of material ( min V-1)..............:
(see appended table 1.5.1)
P
R
ANNEX R, EXAMPLES OF REQUIREMENTS FOR QUALITY CONTROL
PROGRAMMES
N/A
R.1
Minimum separation distances for unpopulated
coated printed boards (see 2.10.6.2)
N/A
R.2
Reduced clearances (see 2.10.3)
N/A
S
ANNEX S, PROCEDURE FOR IMPULSE TESTING (see 6.2.2.3)
N/A
S.1
Test equipment
N/A
S.2
Test procedure
N/A
S.3
Examples of waveforms during impulse testing
N/A
T
ANNEX T, GUIDANCE ON PROTECTION AGAINST INGRESS OF WATER
(see 1.1.2)
N/A
¾