Safety Information

Attachment 1
www.tuv.com Page 6 of 6 Report No.: 50261218 001
North American integrated plug according to ANSI/NEMA WD 6, FIGURE 1-15
Part
No.
Dimensions
Measurement
(mm)
Limit
(mm)
Verdict
Non Polarity only
A.
Thickness of live pin
1.429 1.52 (TYP.)
(1.393 – 1.647)
P
B.
Width of live pin
6.23
6.10 – 6.60 P
C.
Distance between two live pins
(centre)
12.818 12.7
(12.573 – 12.827)
P
D.
Distance between hole centre and
plug face (if hole used)
11.579
11.405 – 12.167
P
E.
Outer diameter of hole (if hole used)
3.976 3.962
(3.835 – 4.089)
P
F.
Inner diameter of hole (if hole used)
3.158 3.175
(3.048 – 3.302)
P
G.
Configurations using
--
Standard Sheet 1-15
P
H.
Length of liv
e pins
16.65
15.88 – 18.24 P
Polarity only
A.
Thickness of live pin
---
1.52 (TYP.)
(1.393 – 1.647)
N/A
B.
Width of live pin
---
6.10 – 6.60
N/A
C.
Distance between two live pins
(centre)
---
12.7
(12.573 – 12.827)
N/A
D.
Distance b
etween hole and plug
face (if hole used)
---
11.405 – 12.167
N/A
E.
Outer diameter of hole (if hole used)
---
3.962
(3.835 – 4.089)
N/A
F.
Inner diameter of hole (if hole used)
---
3.175
(3.048 – 3.302)
N/A
G.
Configurations using
---
Standard Sheet 1-15
N/A
H.
Length of live pins
---
15.88 – 18.24
N/A
I.
Width of live pin
--- 7.80 – 8.18
N/A