Measurement Guide

ManualsBrandsiFit ManualsSolar ShadesCut-to-Size 34 in. W x 73 in. L Cream Cordless Solar Screen Roller Shade

Spring Roller Shade

Installation Guide

Tools Required

Installation Positions

Outside mount

Protec�ve tape

Power drill and 3/32" drill bit, screwdriver or bits with

phillips heads, level, metal tape measure,

a pencil and note pad

For more informa�on contact support@markisolUSA.com

Inside mount

L-Brackets for

*For shades 47" and smaller only 2 brackets sets are supplied

( For wider shades an extra third middle bracket is supplied)

Click-on brackets

alterna�ve moun�ng

Summary of content (8 pages)

PAGE 1
Spring Roller Shade Installation Guide Tools Required pe ve ta � c e t Pro Power drill and 3/32" drill bit, screwdriver or bits with phillips heads, level, metal tape measure, a pencil and note pad ckets a r b on �ng for ketvse moun c a r B L- erna� alt lied Installation Positions pp re su plied) ets a ets s ket is sup k c a r rac 2b only middle b aller d nd smextra thir a " 7 es 4 ades an shad h *For r wider s ( Fo Click- Outside mount For more informa�on contact support@markisolUSA.
PAGE 2
Spring Roller Shade Installation Guide - Measurement instruc�ons Outside mount Inside mount Measure the opening width at top (A): Measure the width from edge to edge of window molding (A): A A Inside mount Measure the window opening width at the top rounded down to the closest 0.5". The depth of the window frame must be at least 1.5" for inside mount. Outside mount Measure window molding width to the closest 0.5". If preferred the shade can also be installed on the wall above the molding.
PAGE 3
Spring Roller Shade Installation Guide - Installa�on posi�ons Inside mount Outside mount Inside mount using L-bracket Inside mount Outside mount For more informa�on contact support@markisolUSA.
PAGE 4
Spring Roller Shade Installation Guide - Inside mount With a pencil, mark the posi�on of the brackets approx. 4" from the inside edges. Use the level to assure that brackets are level across. For shades 47" and shorter 2 moun�ng brackets are supplied. (For 47,5" and wider shades an extra third middle bracket is supplied) Drill moun�ng holes using a 3/32" drill bit. A�ach brackets with the provided screws using a screw driver or power drill. (If installed in drywall use the supplied plugs).
PAGE 5
Spring Roller Shade Installation Guide - Inside mount Carefully remove the protec�ve tape from the shade. For more informa�on contact support@markisolUSA.
PAGE 6
Spring Roller Shade Installation Guide - Outside mount With a pencil, check and mark the position of the brackets, including fixing positions. Mark posi�on of the brackets approx. 4" from the edges of the roller shade. Use a spirit level to ensure the brackets are placed in a straight line. For shades smaller than 47" only 2 brackets are supplied (For wider blinds an extra middle bracket is supplied) Pre-drill holes for screws. Using a Phillips head screwdriver, fix the brackets using the screws provided.
PAGE 7
Spring Roller Shade Installation Guide - Outside mount Carefully remove the protec�ve tape from the shade. For more informa�on contact support@markisolUSA.
PAGE 8
Spring Roller Shade Installation Guide - Adjus�ng the Shade (op�onal) The stop posi�on can be adjusted to your individual preference. To adjust the shade, ﬁrst remove the plas�c cover from the le� bracket, then follow the steps shown below. Option 1: The roller shade is stopping too low Hold the left part of the shade with one hand and li� the adjustable ring in the bracket. Turn the ring together with the shade in the clockwise direction and insert it back in the bracket slot.