Measurement Guide

Spring Roller Shade
Installation Guide - Inside mount
For more informaon contact [e-mail]
With a pencil, mark the posion of the brackets
approx. 4" from the inside edges. Use the level
to assure that brackets are level across.
For shades 47" and shorter 2 mounng brackets
are supplied.
(For 47,5" and wider shades an extra third middle
bracket is supplied)
Drill mounng holes using a 3/32" drill bit.
Aach brackets with the provided screws using a
screw driver or power drill.
(If installed in drywall use the supplied plugs).
Install the shade by simply clicking it on the
bracket with an up and in moon.
Now the shade can be adjusted sideways by
hand to be centered.