Measurement Guide
Spring Roller Shade
Installation Guide - Outside mount
For more informa�on contact support@markisolUSA.com
With a pencil, check and mark the position of
the brackets, including fixing positions.
Mark posi�on of the brackets approx. 4" from
the edges of the roller shade. Use a spirit level
to ensure the brackets are placed in a straight line.
For shades smaller than 47" only 2 brackets are
supplied (For wider blinds an extra middle bracket
is supplied)
Pre-drill holes for screws. Using a
Phillips head screwdriver, fix the
brackets using the screws provided.
For installation on plaster walls use
the wall plugs provided. In order to
install on aluminium frames pre-drill
holes of 3/32" diameter for
bracket screws.
Now the shade can be adjusted sideways by
hand to be centered.