Measurement Guide

Spring Roller Shade
For more informaon contact [e-mail]
Installation Guide - Adjusng the Shade (oponal)
1
:
The stop posion can be adjusted to your individual preference.
Option 1: The roller shade is stopping too low
with the in the clockwise direction and insert it back in the bracket slot. Half turns (180°) and full turns
(360°) are possible. The bigger adjustment in the clockwise direction, the higher the shade will stop. More than 1
adjustment might be needed before reaching desired position.
Hold the left part of
with the in the counterclockwise direcon and insert it back in the bracket slot. Half turns (180°) and full
turns (360°
More than 1 adjustment might be needed before reaching desired position.
To adjust the shade, rst remove the plasc cover from the
le bracket, then follow the steps shown below.
the shade with one hand and li the adjustable ring in the bracket. Turn the ring together
the shade with one hand and li the adjustable ring in the bracket. Turn the ring togetherHold the left part of
shade
shade
Option 2: The roller shade is stopping too high
) are possible. The bigger adjustment in the counterclockwise direcon, the lower the shade will stop.