SDS

Safety Data Sheets (SDSs)
Report No.: ZRLK1504080003 Page 7 of 10
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible
exposure limits. Ensure adequate ventilation.
Individual protection measures, such as personal protective equipment
Eye/Face Protection:
Tightly sealed goggles
Body protection:
Protective work clothing.
Skin protection:
Protective gloves
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Respiratory Protection No protective equipment is needed under normal use conditions. If exposure limits
are exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene Measures Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: prismatic
Color: Silver-white
Odour: Odourless
Physical
State
Odor Threshold: No information available
Change in condition:
pH, with indication of the concentration Not determined.
Melting point/freezing point Not determined.
Initial boiling point and Boiling range: Not determined.
Flash Point Not determined.
Evaporation rate Not determined.
Flammability (solid, gas) Not determined.