Instructions

Table Of Contents

Step 1 — Battery

Remove the cartridge from the console.



Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.



Remove the battery door.



In the images, it shows that the fixer is using a flathead screwdriver. This flathead screwdriver will

work just like the Phillips #00 Screwdriver.



Step 2

Use a plastic opening tool or

spudger to pry out the battery from

the bottom. If a plastic opening tool

or spudger isn't available, your

fingernails may work.



Nintendo DS Bottom LCD Screen Replac…

Draft: 2022-07-25Guide ID: 1304 -

This document was generated on 2022-08-03 09:25:46 AM (MST).