User Manual
Table Of Contents
13
UK
8 Operation
The device is operated in a CANopen network�
The CAN network must be correctly configured so that the device functions
reliably�
Depending on the configuration of the CAN network the settings under
(→ 8.1) and (→ 8.2) have to be adapted�
More notes on operation can be found in the operating instructions:
www�ifm�com
→ Data sheet search → DTM425 → Operating instructions
8.1 CANopen devices (DTM424 / DTM425)
The device is delivered with the node ID 32 and a bit rate of 125 Kbits/s�
8.2 J1939 devices (DTM426 / DTM427)
The device is delivered with the address 235 and a bit rate of 250 Kbits/s�
9 Dimensions
Original Scale Drawing (MTD)
EPS Source
Product Scale Drawing
Frame Size: 80 mm x 27 mm
P_MZ_190_0018
DTM424
M12 x1
44
57
70
LED
59
24
4
1
M18x1
M12 x1
44
57
70
LED
59
24
4
1
M18x1
Original Scale Drawing (MTD)
EPS Source
Product Scale Drawing
Frame Size: 80 mm x 27 mm
P_MZ_190_0017
DTM425
M12 x1
35
57
70
LED
59
10
24
4
M18x1
M12 x1
35
57
70
LED
59
10
24
4
M18x1
DTM424 / DTM426 DTM425 / DTM427
10 Technical data
The data sheets are available on our website at:
www�ifm�com
→ Data sheet search → DTM424