User Manual
Table Of Contents
- 1 Preliminary note
- 2 Safety instructions
- 3 Functions and features
- 4 Functions
- 5 Installation
- 5.1 General installation instructions
- 5.2 Notes on ID tag mounting
- 5.3 Avoiding interference
- 5.4 Mechanical design
- 5.5 Installation on tanks with mounting adapter
- 5.6 Installation on bypass pipes with mounting adapter
- 5.7 Installation without mounting adapter
- 5.8 Mounting distances
- 5.9 Positioning of the ID tags
- 6 Electrical connection
- 7 Display elements
- 8 Operation
- 9 Dimensions
- 10 Technical data
- 11 Maintenance, repair, disposal
- 12 Approvals/standards
5
UK
2.2 Radio equipment
In general, radio equipment must not be used in the vicinity of petrol stations, fuel
depots, chemical plants or blasting operations�
► Do not transport and store any flammable gases, liquids or explosive
substances near the unit�
2.3 Interference of electronic and medical devices
Operation can affect the function of electronic devices that are not correctly
shielded�
► Disconnect the device in the vicinity of medical equipment�
► Contact the manufacturer of the corresponding device in case of any
interference�
3 Functions and features
In connection with the evaluation unit DTE10x the read/write head ANT51x
enables non-contact reading and/or writing of the RFID transponders (ID tags)
conforming to the system�
The data is converted into digitally coded values and provided to the evaluation
unit�
4 Functions
4.1 Operating principle
The ID tags are operated passively, i�e� without battery� The energy required for
operation is supplied by the read/write head�
The physical principle of the energy transfer is based on inductive coupling� The
integrated antenna coil in the read/write head generates a magnetic field which
partly penetrates the antenna coil of the ID tag� A voltage is generated by induction
that supplies the data carrier with energy�