Operating Instructions

EIO344
Bluetooth Mesh adapter
12
8 Parameters and commands
8.1 Parameters and commands via IO-Link
Parameter
Function
Application-specific identifier
Possibility to identify a device with user or application-specific information
Plant identification identifier
Possibility to identify a device with function-specific information
Location identifier
Possibility to identify a device with location-specific information
Event counter
The event counter increments when the assigned event has occurred
Event history
Displays a list of the last occurred events
Operating hours
Operating hours counter since delivery
Internal temperature
Current internal temperature
Active events
Current upcoming events
Parameter configuration faults
Shows the parameter incorrectly set at the time of the download
FOU
Behaviour of output 2 in case of an internal fault
Output configuration
Setting the output behaviour
Switching bit
Bit in the IO-Link process data stream that is to be output as switch point 1
Tab. 3: IO-Link parameters
Commands
Function
Reset application
Resets settings (except:
application-specific identifier, plant identifier,
location identifier, Bluetooth password, Bluetooth Mesh network)
Back to box
All settings are set to the factory setting and communication is blocked until
the next switch-off and switch-on
Reset event history
Resets the event history
Reset event counter
Resets the event counter
Reset Bluetooth password
Resets the Bluetooth password
Flash on
Activating the command makes the responding unit flash
Flash off
Deactivates the flashing of the LED of the previously addressed
unit
System test command 240
Test event 1 8DFE is activated
System test command 241
Test event 1 8DFE is deactivated
System test command 242
Test event 2 8DFF is activated
System test command 243
Test event 2 8DFF is deactivated
Tab. 4: IO-Link commands