Operating Instructions

Bluetooth Mesh adapter
EIO344
13
8.2 Bluetooth parameters and commands
Parameter
Function
Name of the manufacturer
Manufacturer name assigned a manufacturer ID
Manufacturer text
Additional information about the manufacturer
Product name
Full product name
Product ID
Manufacturer
-specific product or type identification
(e.g. article or order number)
Product text
Additional product information about the device
Serial number
Unique, manufacturer-specific identification of the individual unit
Hardware version
Unique,
manufacturer-
specific identification of the hardware version of the
individual device
Firmware version
Unique, manufacturer
-
specific identification of the firmware version of the
individual device
Bootloader version
Unique,
manufacturer-
specific identification of the bootloader version of the
individual device
EEPROM version
Manufacturer-specific EEPROM version
Bluetooth MAC address
MAC address of the Bluetooth interface
Bluetooth software version
Unique, manufacturer
-specific identification of the Bluetooth software
version of the individual device
Bluetooth bootloader version
Unique, manufacturer
-specific identification of the Bluetooth bootloader
version of the individual device
Operating hours
Operating hours counter since delivery
Internal temperature
Current internal temperature
Active events
Current upcoming events
Device status
Display of the current device and diagnostic status
Application number
Unique ID of the adapter in the mesh network
FOU
Behaviour of output 2 in case of an internal fault
Output configuration
Setting the output behaviour
Switching bit
Bit in the IO-Link process data stream that is to be output as switch point 1
P-n
Transistor function, switching logic of the outputs (pnp/npn)
Security mode
Activate or deactivate Bluetooth security
Bluetooth password
Code for write protection
Device name
Designation of the adapter
Base station name
Name of the connected base station
Transmission interval
Transmission interval of process data via mesh
Signal strength
Signal strength of the mesh network
BT mesh transmission
BT password function
BT Mesh ID
Assigned Bluetooth Mesh ID
BT Mesh address
Bluetooth Mesh address
BT Mesh node
Bluetooth Mesh support
BT firmware version
Version of the installed Bluetooth firmware
BT firmware type
Type of Bluetooth software
BT firmware data block
Bluetooth packet size of the update data block
BT firmware maximum size
Bluetooth maximum packet size
Master cycle time
Current cycle time to the connected IO-Link device
Set master cycle time
Pre-configuration of the IO-Link master cycle time
Event of the master port
Event of the IO-Link master port
Settings of the master port
Settings of the IO-Link master
Com speed of the master port
IO-Link Com rate of the connected IO-Link sensor
Validation and data storage mode of the
master port
Configuration of the data storage mode
Manufacturer ID of the master port
Manufacturer ID of the pre-configured data storage device
Device ID of the master port
Device ID of the pre-configured data storage device
Manufacturer ID of the IO-Link device
Manufacturer ID of the connected IO-Link device
Device ID of the IO-Link device
Device ID of the connected IO-Link device
DE