Users Manual Part 2
Table Of Contents
- Contents
- 1 Preliminary note
- 2 Safety instructions
- 3 Intended use
- 4 Items supplied
- 5 Function
- 6 Mounting
- 7 Electrical connection
- 8 Parameter setting
- 9 Operation
- 10 Troubleshooting
- 10.1 Troubleshooting incorrect level readings
- 10.1.1 Level too high / too low
- 10.1.2 Measured value is stuck
- 10.1.3 Measured value drops when level close to antenna
- 10.1.4 Measured value fluctuates
- 10.1.5 Measured value is occasionally unstable
- 10.1.6 Lagging of measured value during rapid level changes
- 10.1.7 Measured value correct at 0% (4 mA) but incorrect at 100% (20 mA)
- 10.1.8 Incorrect measured value when level is above 50%
- 10.1.9 Measured value drops to zero close to tank bottom
- 10.1.10 Level measurement is lost in an empty tank
- 10.1.11 Alert mode when level close to tank bottom
- 10.1 Troubleshooting incorrect level readings
- 11 Maintenance, repair and disposal
- 12 Factory setting
- 13 Appendix
LW2720 Electronic level sensor
4
1 Preliminary note
You will find instructions, technical data, approvals and further information using the QR code on the
unit / packaging or at www.ifm.com.
1.1 Symbols used
Requirement
Instructions
Reaction, result
[...] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
1.2 Warnings used
CAUTION
Warning of personal injury
w Slight reversible injuries may result.