Datasheet

Inductive sensors
Made in Germany
IA0004
IA-2010-ABOA
Inductive sensor
Plastic housing Ø 20 mm
Cable
Sensing range 10 mm [nf]
non-flush mountable
AC/DCElectrical design
normally openOutput
20...250 AC/DCOperating voltage [V]
350 AC (...50 °C) / 250 AC (...80 °C) / 100 DCCurrent rating (continuous) [mA]
î: 2.2 A (20 ms / 0.5 Hz)Current rating (peak) [mA]
5Minimum load current [mA]
noShort-circuit proof
noReverse polarity protection
noOverload protection
< AC 6.5 / < DC 6Voltage drop [V]
< 2.5 (AC 250 V) / < 1.3 (AC 110 V) / < 0.8 (DC 24 V)Leakage current [mA]
10 ± 10 %Real sensing range (Sr) [mm]
0...8.1Operating distance [mm]
-10...10Switch-point drift [% of Sr]
1...15Hysteresis [% of Sr]
25 AC / 70 DCSwitching frequency [Hz]
mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.4 / Al approx. 0.3 / Cu
approx. 0.2
Correction factors
-25...80Ambient temperature [°C]
IP 67, IIProtection
EN 60947-5-2
class BEN 55011:
EMC
603MTTF [Years]
PBTHousing materials
Function display
yellowSwitching status LED
PVC cable / 2 m; 2 x 0.5 mm²Connection
0.165Weight [kg]
Recommendation: check the unit for reliable function after a short
circuit.
Remarks
Mounting clampAccessories (included)
Wiring
Core colours
brownBN
blueBU
Note: miniature fuse to IEC60127-2 sheet 1,
≤ 2 A (fast acting)
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — GB — IA0004 — 06.03.2003