Datasheet

Made in Germany
Product characteristics
Inductive sensor
Metal thread M12 x 1
Connector
Increased sensing range
gold-plated contacts
Sensing range 4 mm [f]
flush mountable
Electrical data
DC PNPElectrical design
10...36 DCOperating voltage [V]
< 10 (24 V)Current consumption [mA]
IIProtection class
yesReverse polarity protection
Outputs
normally closedOutput function
< 2.5Voltage drop [V]
100Current rating [mA]
pulsedShort-circuit protection
yesOverload protection
700Switching frequency [Hz]
Range
4Sensing range [mm]
4 ± 10 %Real sensing range (Sr) [mm]
0...3.25Operating distance [mm]
Accuracy / deviations
mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.5 / Al approx. 0.4 / Cu
approx. 0.3
Correction factors
3...15Hysteresis [% of Sr]
-10...10Switch-point drift [% of Sr]
Environment
-25...70Ambient temperature [°C]
IP 67Protection
Tests / approvals
EMC
4 kV CD / 8 kV ADEN 61000-4-2 ESD:
10 V/m (80...1000 MHz)EN 61000-4-3 HF radiated:
2 kVEN 61000-4-4 Burst:
10 V (0.15...80 MHz)EN 61000-4-6 HF conducted:
class BEN 55011:
Inductive sensors
IFS206