Datasheet

Capacitive sensors
Made in Germany
KI0040
KI-2015-FBOA/NI/SS
Capacitive sensor
Plastic thread M30 x 1.5
Connector
Increased immunity to conducted radio
frequency interference
Sensing range 15 mm [nf]
non-flush mountable
AC/DCElectrical design
normally open / closed programmableOutput
20...250 AC/DCOperating voltage [V]
250 (...50 °C) / 200 (...70 °C)Current rating (continuous) [mA]
î: 1.5 A (20 ms / 0.5 Hz)Current rating (peak) [mA]
5Minimum load current [mA]
noShort-circuit proof
noReverse polarity protection
noOverload protection
< AC 10 / < DC 8Voltage drop [V]
< 2.5 (AC 250 V) / < 1.7 (AC 110 V) / < 1.5 (DC 24 V)Leakage current [mA]
15 ± 10 %Real sensing range [mm]
0...12.1Operating distance [mm]
-15...15Switch-point drift [% of Sr]
1...15Hysteresis [% of Sr]
25 AC / 40 DCSwitching frequency [Hz]
water = 1 / glass approx. 0.4 / ceramics approx. 0.2 / PVC approx. 0.2Correction factors
-20...70Ambient temperature [°C]
IP 65Protection
1997 + A1: 1999 + A2: 2003IEC 60947-5-2:EMC
PBTHousing materials
Function display
yellowSwitching status LED
connector (DIN EN 175301-803)Connection
0.094Weight [kg]
Recommendation: check the unit for reliable function after a short
circuit.
Remarks
2 lock nuts, screwdriverAccessories (included)
Wiring
Note: miniature fuse to IEC60127-2 sheet 1,
≤ 2 A (fast acting)
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — GB — KI0040 — 06.12.2007