Specifications

11
IGEL Technology GmbH IGEL Zero RFX 5.02.100
2. Boot Procedure
The quick installation procedure is complete.
 Restart the system in order to start the boot procedure.
2.1. Boot Menu
 During the boot procedure, press the ESC key in the Secondstage Loader when the Loading Kernel
message is shown on the screen.
A menu with four boot options as well as an option for resetting the thin client to the default factory
settings will appear:
Quiet Boot (page 11)
Normal boot
Verbose Boot (page 11)
Boot with system messages
Emergency Boot (page 11)
Setup only
Failsafe Boot (page 12)
With CRC check
Reset to Factory Defaults (page
12)
Resets the thin client to the default
factory settings
2.1.1. Quiet Boot
Quiet Boot is the default boot mode. In this mode, all kernel messages are disabled and the graphical user
interface is started.
2.1.2. Verbose Boot
Unlike in Quiet Boot mode, the boot messages are shown in Verbose Boot mode. A diagnostics shell is also
available. This can be used to execute common commands (such as ifconfig etc.) when searching for and
rectifying faults.
 Enter init 3 to close this shell.
The boot procedure will then resume.