Specifications

27
IGEL Technology GmbH IGEL Zero RFX 5.02.100
5.5. Remote Access (SSH / RSH)
In order to allow central administration, the thin client can be configured in such a way that it can be
accessed via the WAN.
Remote access to the local setup is permitted by default. However, you can restrict remote access to a
specific user from a specific host. To enable restriction, give the full name of the host (e.g.
xterm.igel.de) and the permitted user.
5.6. Energy
Shutdown / Power Management
Here you can allow or prevent the user from shutting down the
terminal or placing it in standby mode and configure the
time-controlled standby mode. The standard action when the
on/off button is pressed can also be pre-configured.
DPMS
If your screen supports Display Power Management Signaling,
other energy saving functions are available. Three different
modes are offered: Standby, Suspend and Off. Each mode is
activated after a configurable time period (in minutes).
Naturally, all stages are gone through only if the X-Server does not receive any new entries during this
period.
5.7. Firmware Customization
Various parts of the firmware can be adjusted or expanded. The individual functions are described in the
chapter entitled Firmware customization (page 88). An overview is given below:
Custom partition
Allows you to dump your files
Custom application
Allows you to define the options for launching your own applications from
the customer partition
Custom commands
Allows you to mount your own system commands and call up applications
at specific times (rc.custom)
Custom bootsplash
Allows you to replace the IGEL start logos with your own graphics
Environment variables
Allows you to use dynamic parameters when configuring a number of
session types
Features
Allows you to disable system components, e.g. session types that are not
needed