Specifications

30
IGEL Technology GmbH IGEL Zero RFX 5.02.100
DDC
Allows you to activate the Display Data Channel in order to share information
between the system and the screen. If screen problems should occur, enable
and disable the DDC setting in the Options by way of a test. DDC is enabled by
default and the native resolution supported by the screen is determined
automatically.
Screen configuration
Every screen connected to the IGEL UD device can be configured independently.
The position of the individual screens can be determined in relation to Screen
1. Click on the Identify button to show the screen identifier on each device.
You will find the maximum supported resolutions on the data sheet of your device.
6.1.1. DPMS
If your screen supports Display Power Management Signaling, other energy saving functions are available.
Three different modes are offered:
• Standby
• Suspend
• Off .
Each mode is activated after a configurable time period (in minutes).
Naturally, all stages are gone through only if the X-Server does not receive any new entries during this
period.
6.1.2. XDMCP
Enable the XDMCP function for the screen in order to be able to select the appropriate connection type.
Please note that the local setup can then be accessed only using the hotkey Ctrl+Alt+s. This should
therefore not be disabled for the setup application (Accessories→Setup).