Specifications

8
IGEL Technology GmbH IGEL Zero RFX 5.02.100
1. Quick Installation
If you follow the procedure below, you can install the thin client within your network environment in just a
few minutes:
Connect the thin client to a monitor (VGA, DVI, DisplayPort), an AT-compatible keyboard with a PS/2 or 1.
USB connection, a USB mouse and the LAN using an RJ45 connector.
Connect the thin client to the power supply. 2.
Start the thin client and wait until the graphical user interface has loaded. 3.
Click on the Setup symbol in the taskbar, or launch the IGEL Setup using the key combination Ctrl+Alt+s. 4.
Select the system language and keyboard layout under User Interface → Language. 5.
Select the display resolution under User Interface → Display. 6.
Enter a local IP address in the Network section of the setup 7.
or retain the default DHCP mode for automatic network configuration.
Click on OK to save and apply your changes. 8.
The device will now restart if necessary and will use the new settings thereafter.
A handy tool tip is available for virtually every setting. If you would like to know more about a setting or
option, move your mouse pointer over it and wait for a moment. You can configure the tool tips under
User Interface → Screen → Desktop.