Specifications

86
IGEL Technology GmbH IGEL Zero RFX 5.02.100
11.2.3. Auto logout
Define an Auto Logout action which is carried out when you end the last instance of a session type:
Bring up the Security → Login → Auto Logout setup page. 1.
Choose a Session Type. 2.
Choose a command (Auto Logout Command). 3.
Save your settings by clicking on Apply or OK. 4.
If the last session instance of the selected type is ended, the system will carry out the set action.
The Shutdown command carries out the set action. You can check this under System → Energy →
Shutdown.
The Logout command has no effect if you have not defined a login method under Security → Login
(smartcard, active directory/Kerberos or IGEL Shared Workplace). The Logout command cannot be used
together with an appliance - in this case, only the Shutdown/Suspend and Reboot commands will work
correctly.
If you use Auto Logout commands in an appliance, ensure that the appropriate session type was selected -
e.g. Horizon View when using the VMware Horizon View Appliance.
11.3. AD/Kerberos Configuration
 Enable and configure Kerberos on these setup pages in order to use this service for login and single
sign-on purposes.
Standard realm
Specifies the standard Kerberos realm for the client. Set this value so that it
corresponds to your Kerberos realm (Windows domain).
DNS look-up KDC
Specifies whether DNS SRV records should be used to find key distribution centers
(KDCs, domain controllers) and other servers for a realm if they are not indicated.
DNS look-up realm
Specifies whether DNS TXT records should be used to determine the Kerberos realm of
a host.
No addresses
If this option is set, the first Kerberos ticket is addressless. This may be necessary if the
client is located behind an NAT device (Network Address Translation).
11.3.1. Realm 1-4
Up to 4 realms where a login is possible can be configured here.