产品规格书 Product Specification Report Supplier Name: IGEN Tech Co., Ltd. Supplier Part No.: 51-0340-004 Customer Name: Ningbo Deye Technology Group Co., Ltd. Customer Part No.: 30080519000003(318010038) Product Name: BT/WiFi Module Product Type: MW-4 WiFi Firmware Version: WEB Version: Inverter Type: Inverter Protocol: Effective Date: Customer Approval Supplier Approval Confirmed By www.igen-tech.
产品规格书 Current Version 1.0 Note Updated Time First Draft (General scenario for Deye) 2021.12.03 Updated By Introduction By collecting operating data and power generation of inverter, Module can run a long-term and efficientmonitoring of PV system. Module can connect to single inverter via Uart TTL interface, which enables to collectall the data of PV system from the inverter. Meanwhile, remote monitoring cloud platform (SOLARMAN Portal)provides powerful data support for the logger.
产品规格书 nReload 8MByte Supported(Onboard) -40℃-+85℃ -45℃-+95℃ < 80% RH 41.50*25mm *1.2mm (±0.2mm) Flash Hardware Watchdog Working Temperature Storage Temperature Storage Humidity Size Software Parameter Wireless Network Type STA/AP Security Mechanism WEP/WPA-PSK/WPA2-PSK/WPA3-SAE Encryption Type WEP64/WEP128/TKIP/AES Firmware Upgrade Local wireless/Remote upgrade Network Protocol IPv4,TCP/UDP/HTTP/TLS 1.
产品规格书 Pin 1 Description GND Network Name GND Type Power Details Ground 2 VCC 3.3V 3.3V Power Recommended power range: 3.3V±5% 3 UART sending&receiving data UART-TXD 0 3.3V com serial 0 output, GPIO16 available 4 UART sending&receiving data UART-RXD I 3.
产品规格书 4.1Front View 4.2 Back View Size Tolerance:±0.
产品规格书 Firmware Upgrade Direct Transmission Domain Name: IP: Port No.: access1.solarmanpv.com(solarman 3.0) 47.102.152.71(solarman 3.0) 10000(solarman 3.0) —— APN: Contact IGEN Tech Co., Ltd. Add: Block F4, China IoT International Innovation Park, No. 200, Linghu Avenue, Wuxi, Jiangsu, P. R. China Tel: +86-400-181-0512 Email: info@solarmanpv.com Website: www.solarman.
产品规格书 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
产品规格书 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.
产品规格书 Product List No.