2kW CONVECTOR HEATER WITH THERMOSTAT Model Number: IG5200 / IG5250 INSTRUCTIONS FOR USE Thank you for purchasing this product Please read these instructions 1
SAFETY INSTRUCTIONS Read and follow all of the instructions even if you feel you are familiar with the product, and find a place to keep this manual handy for future reference. For your convenience record the complete model number, beginning with „IG‟, and batch number beginning with „5‟ along with the date that you purchased the product and the original receipt and attach to this manual. Retain in the event that the warranty service may be required.
Assembly Instructions 1. Ensure that the heater is unplugged and that the power switches are turned to the off position. 2. Turn the heater upside down. 3. Locate the two holes at each end of the base of the heater. 4. Secure the footplates to the base through the holes using the screws provided. 5. Turn the heater upright. Wall Mounting Instructions Before mounting please ensure the wall is suitable for this type of appliance. 1. Find the correct position on the wall following the safety instructions.
Operating the Heater Choose a suitable location for the heater ensuring you have taken account of the safety instructions NOTE: It is normal that when the heater is turned on for the first time or after not being used for a long period of time that it may emit a slight smell and fumes. These will disappear when the heater has been on a short while. 1. Take out the heater from its box carefully. Please save the box to store the heater when not in use. 2.
Troubleshooting Guide Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot determine the fault then please call our Customer Service number 01473 271272. Problem Possible Cause The heater does not work. The heater is getting too hot. Solution 1. Not properly plugged into the mains wall socket. 2. Not switched on 3. No electricity in the mains wall socket. 1. Plug in firmly. 2. Make sure appliance is switched on. 3. Check fuse or breaker. 1.
Guarantee Information This product is guaranteed for a period of 2 years from the date of purchase against mechanical and electrical defects. The warranty does not cover consumable parts that require replacement under normal use or accessories. This includes filters, belts, and accessory attachments. 1. If a fault develops within 28 days of purchase it should be returned to the place of purchase for exchange. 2.