SINGLE HOTPLATE Model Number: IG8010 INSTRUCTIONS FOR USE Thank you for purchasing this product.
Trouble with your hotplate? … Try our troubleshooting guide on page 4. If that does not solve the issue contact us … Tel: 01473 271 272 Email: info@igenix.co.uk Fax: 01473 270 733 Website: www.igenix.co.uk Postal Address: Customer Service Department Pik-a-Pak Electrical Distributors 38 Bluestem Road, Ransomes Europark, Ipswich, IP3 9RR When writing or emailing us to report a fault please ensure you attach a copy of your proof of purchase.
IG8010 – Single Hotplate at a Glance 1500W Hotplate Power indicator light Temperature control dial Using Your Hotplate Before first use Before using your hotplate for the first time, it needs to be operated for 5 minutes on the MAX setting. This allows the protective coating on the hotplates to burn off. This may generate some smoke during this period, so be sure to be in a well ventilated room when you do this.
Troubleshooting If you are having problems with your hotplate, please use our troubleshooting guide below. If you are unable to resolve the issue using the guide please ring our Customer Service Department on 01473 271 272. Please have the model code, batch number and purchase information available. Problem Possible Cause 1. The hotplate does not work. 2. Not properly plugged into the mains wall socket. No electricity in the mains wall socket. Solution 1. 2. Plug in firmly. Check fuse or breaker.