User Manual iGET SECURITY M3 Home Intelligent Alarm System Designed for home and business security. Easy to setup and use with App M3. World famous expert of smart-home alarm system Perfectly match all Android and iOS smart phones.
MENU The mobile app in this manual is the Android version of iGET SECURITY M3 app. The snapshots and texts might be different from the version you’re using. Please refer to the latest version.
2
Get ready and power on Insert sim card and connect the power cable • On the back of the panel, open the battery cover, you will see a slot for your SIM Card. Insert the Sim Card and connect the power cable. For those micro or nano SIM cards, please use sim adapter to fit the card slot. Power ON • Flip the switch on the back of the panel to the ON position. Replace the battery cover. Wait 20 seconds as the system runs a start-up diagnostic with a welcome screen.
Work with the main panel 1/3 Control Button Press LED Monitor to enter the settings menu. Press to navigate. Press to select. Press to go back. Child Lock Lock: Long-press Unlock: Long-press for 6 seconds until the lock icon shows on screen. for 6 seconds until the lock icon disappears. Power Light & Delay Arming Button Power Light with logo. Long-press to activate delayed arming. Delayed Arming means the system will wait a few seconds before going into ARM status.
Work with the main panel 2/3 Battery Life Indicate the remain battery life when AC power is OFF. 08:18 18°c AC Power External power is available. Arm All active sensors can trigger alarm. Wednesday, September 15 Disarm Stop trigger alarm, except those on 24-hours mode. Clock Real-time Temperature After initializing process, the time The temperature surrounding main panel. will synchronize with your phone’s. Users can change ºC or ºF in settings. Home Arm Only those on Home mode stop trigger alarm.
Work with the main panel 3/3 Alarm Clock Check all working alarm clocks set by APP. 6 ºC/ ºF Switch Screen Timeout Switch the temperature scale between Fahrenheit and Celsius. Set the screen saving time.
Initializing by APP iGET SECURITY M3 About languages • There is a build-in default language pack on App. The app will automatically check and fetch the latest available language files, or use the latest saved language pack or default one. • You don’t have to reset App while http://din.bz/iGetAndroid d http:/ din.bz/iGetiOS switching language. The setting will immediately effect right after the language being selected.
Add a new Alarm M3 1/2 • APP is a great tool to control alarm M3. M3 should be added to APP before using, which we call binding. One APP can handle more than one alarms M3. The phone number of M3 and the password would be asked during binding. Different role has its default password. Administrator: General operations and advanced settings are available. User: General operations only. • The beginners will get kindly reminder, which could help them through the settings step by step.
Add a new iGET SECURITY M3 2/2 About the reply SMS • Because the iOS’s limitation, we can’t capture the SMS. So you have to type in the codes by your own. • Few Android phones may also need to enter codes manually due to the limitation from some so-called security software, or the self-made ROM by hobbyists. • Most of the time, users only need to wait few seconds. • If you can’t receive the reply SMS, please check the M3 phone numbers entered before, or if the phone is charged.
Switch between one/two hands mode One/two hands mode • There are different sizes of smart phones with Android or iOS systems, which bring operational inconvenience for users. • We bring convenience by offering one/two hands modes for both small sizes phones (3.5 inches including under) and big sizes phones and tablet PC (4 inches including above) • It’s one good case to show iGET ’s principle: make every effort to minimum users’ operative difficulty.
How to use the Easy Control Panel Navigator Swap to switch between menus. The other two menus are [Accessories and Device Info] and [Settings] Easy Control Panel Arm, Disarm, Home Arm, SOS, Etc. Accessories QuickView The fastest way to use your accessories. • Arm: All accessories under none “Disable” status are on arm. • Home arm: Only the accessories on "Instant" or "24 Hours" mode are on arm. • Disarm: Only “24 Hours”mode accessories are on arm.
How to add emergency contacts • Slide softly on Main Panel, switch to [Accessories and Device Info] menu. • Click [Emergency contacts]. Up to 6 emergency contacts are for settings. Tap any of them for editing. • The M3 calls and texts to emergency contacts when alarming. You can decide which informing message to receive. • Please set your cellphone number as the 1st emergency contact. Because only the first one could receive arming notification.
How to add accessories • Click + on top-right of the screen. • Scan the bar code or QR code printed on accessories with phone’s camera. • Name the accessory. • Set the trigger modes or other properties as you need, then save.
Advanced settings and other features 1/3 Emergency Contact: Up to 6 contacts for setting. Alarm Clock: Up to 4 clocks for setting, with 4 modes each. Temperature Setting: An informing SMS would be received when surrounding temperature is out of the safe range you set. Language Setting: Select and apply the app language. (Language for M3 menu and SMS needs to be set via main panel) Knock Over to SOS: Punch or knock over the main panel to trigger SOS when the switch is ON.
Advanced settings and other features 2/3 Arming Schedule: Up to 6 groups of settings for daily arming. (Disarm is not supported for security consideration) Delay Time (ARM): Waiting time before arming when receiving an order. It can be 90 seconds longest. Delay Time (ALARM): If some sensors in delay mode trigger alarm, system will wait few seconds before activating alarm. It can be 90 seconds longest. Siren Time: The build-in siren time, up to 30 minutes long last.
Advanced settings and other features 3/3 M3 sends SMS to reply your inquiry here. Logs & Events: List recent arm, disarm and alarm records. Sim Card Balance: Check the balance by sending query SMS to local carrier from M3. System Status: Check current time, arm status, etc. Arm & Alarm Delay Time: Check delay settings for Arm/Alarm. Informing Strategies: • Security Accessory’s Trigger Mode: Check types of informing SMS received Show names of paired accessories and from M3 when event occurs.
FAQ Can I use non-iGET branded accessories with the iGET SECURITY M3? Sorry, M3 only supports the iGET accessories. 1. The iGET accessories use encrypted communication protocols with patented technology. This makes them safer and more stable. 2. The iGET accessories are easily paired with the system just by scanning QR codes or barcodes. All of our accessories support low-battery warning. How can I get help with my M3 system? 1. Contact the local agency first to get the fastest support services. 2.
Appendix1: Accessory installing 10-30o 6.5-7.5 feet • Remember to pull out the battery insulating pieces before use. • Use APP for pairing accessories before installing. • It’s recommended to take pictures for the QR codes or barcodes printed on the Less than 0.4 inches. accessories and save them to your phone’s album.
http://din.bz/iGetAndroid d http:/ din.bz/iGetiOS iGET ©2015. All rights reserved. Website : www.iget.eu E-mail : sales@iget.
1. Use the device only and exclusively in accordance with this manual. Failure to follow instructions can lead to fire or damages to the device. 2. For safety reasons protect the device from falling, shortage of electric circuits and high temperatures. If the device or battery suffers from distortion and cause damage to the device, stop using the device immediately. 3. Keep out of the reach of children. Only adult persons may use the device.