Operation Manual

Get ready and power on

Insert sim card and connect the power cable

Power ON

• On the back of the panel, open the battery cover, you will see a slot for your

SIM Card. Insert the Sim Card and connect the power cable.

For those micro or nano SIM cards, please use sim adapter to ﬁt the card slot.

• Flip the switch on the back of the panel to the ON position. Replace the battery cover.

Wait 20 seconds as the system runs a start-up diagnostic with a welcome screen.

• You will hear a conﬁrmation when the test is complete.

When you see the main screen ( left ) the system is ready.

• M3 uses GSM based SIM cards to send text messages and make phone calls.

•

Make sure PIN-codes and voicemail are de-activated on the SIM before use with the

panel.

• Make a note of the SIM telephone number, you will need it for setup.