Specifications
Table Of Contents
Playmate Kool Tunes V2
Revision: 1 Revised by: Roque Barros Date: 11.01.21
2 of 8
1. Product Description
1.1. The Playmate (Side Button) Kool Tunes Version 2 will be made up in China. This
Playmate with new body will “only” be used for Kool Tunes product. The Playmate Kool
Tunes V2 will be Bluetooth version instead of using cable as the previous version,
having two speakers and all the specs in place as the Playmates manufactured in Katy.
1.2. New Playmate Kool Tunes Version 2 Bluetooth Cooler Assembly
consisting of the following components
1.2.1. Actual Injection Molded Liner – PP
1.2.2. New Blow Molded Body – HDPE
1.2.3. Actual Injection Molded Button Insert –PP
1.2.4. Actual Injection Molded Hinge Insert – PP
1.2.5. Actual Injection Molded Button Insert – PP
1.2.6. Actual Injection Molded Lid –PP
1.2.7. Actual Injection Molded Hinge Cover – PP
1.2.8. Actual Injection Molded Lid Cover – PP
1.2.9. Polyurethane Foam
1.2.10. Screw (#10 x 5/8 LG/Round Washer)
1.2.11. Spring (.040 Wire, 1.062 Long, Spring O.D. .475”)
1.2.12. 2 Speakers
1.2.13. New 1 Back frame- PP
1.2.14. New Batteries case- PP
1.2.15. Lithium Battery
2. The Speaker Parameters will be:
Bluetooth
BLUETRUM AB5325B V5.0
Speaker
33mm*2 4Ω 5W
Output Power
10W@10%THD+N
Signal-to-noise ratio
>85dB
Frequency response
80Hz-20KHz
Input voltage
5V
Input Current
1000mAh
Total harmonic distortion
3%
Battery
3.7 V 2400mAh (Go 3 is 750mAh)
Bluetooth distance
>10m
TWS distance
N/A
Playing Time
5+ hours at 50% volume
N.W.