Specifications

Playmate Kool Tunes V2
Revision: 1 Revised by: Roque Barros Date: 11.01.21
6 of 8
3.2 Impact Test
3.2.1 Product should resist 3 drop tests of 3 feet height with no damages
on it’s performance.
3.2.3 Handle Strength - Test to be performed in accordance to Igloo
Generic Spec 8.3 of the Igloo Generic Spec.
3.3 Labeling and Packaging
3.3.1 Marking and Labeling - in accordance to Igloo Spec 9.0 of Igloo
Generic Spec IPS-INT-05
3.3.2 Packaging - Must perform per Igloo Spec 11.0 in accordance with
Igloo Generic Spec IPS-INT-05
3.3.3 Package must withstand test protocol ISTA 2A
3.3.4 Package must withstand shipping by small parcel, air, rail, and sea
containers without damage to the product. At a minimum, to the
cosmetic and performance of the product.
3.4 Label Adhesion and Alignment
3.4.1 Labels must not peel away from a substrate at a force less than 5 lbs.
3.4.2 Labels must not peel away from a substrate at a max. temperature of 125 F.
3.4.3 Labels must not peel away from a substrate at a minimum temperature of 15 F
3.4.4 Label “must” be 100% free of any bubbles or creases
3.4.5 Maximum label misalignment from edge to edge of the product is 1/8”
3.4.5 Label must be straight within 1/8”
5. Product Control Plan
No.
Attribute
Description
Specification
Process
Control
Frequency
1
Critical Dimension
Per Print
Yes
FAI
2
Function ability
Product should work as intended
Wireless range must be 30-ft.
Yes
AQL
3
Flash
None Allowed. Surfaces should feel smooth
when you run your hand around the perimeter
Yes
100%
4
Scratches
None visible from 12” when removed from the
packaging
Yes
AQL
5
Cleanliness
Should have no visible dirt or grim from 18”
Yes
AQL