Specifications

Playmate Kool Tunes V2
Revision: 1 Revised by: Roque Barros Date: 11.01.21
7 of 8
6. Regulatory / Materials:
6.1. The materials used in these products shall conform to the applicable Igloo
specifications and requirements of the product documentation.
6.2. Alternatives and Deviations- Alternative materials or parts shall not be used
without first obtaining the Igloo Product Corporation’s written approval of the proposed
change.
6.3. Materials shall conform to the applicable specifications and requirements of the
product documentation. All materials must have proper regulatory listings where
required.
6.4. Heavy Metals - The use of heavy metals (i.e. cadmium, lead, mercury,
hexavalent Chromium) shall be restricted from product component materials (any part
of the finished product assembly including, but not limited to packaging, inks, labels,
pigments, adhesives, coatings, plastic materials). Incidental heavy metal content shall
not exceed 100 ppm (as a total concentration of Pb, Hg, Cd and Cr VI, with the Pb
concentration not to exceed 30 ppm).
6.5. Food-contact surfaces – Any area of a product expected to touch food (e.g.
the inside of a cooler) must be constructed of materials which meet FDA requirements
for food contact. Materials used in food contact surfaces should also not contain BPA.
6.6. Phthalates -The use of materials containing compounds identified as Phthalates
(DBP, BBP, DEHP, DNOP, DIDP, DINP and DnHP) shall be restricted. Soft plastic parts,
coatings and TPR materials used in this product must be tested and certified that the
concentration of any identified PAH is less than 1000 PPM.
6.7. PVC – PVC should not be used as a material if alternative materials are
available. If no alternatives can be identified, the PVC must be free from phthalates
and lead.
7. Quality Criteria
7.1. An inspection plan/checklist will be provided to identify the applicable quality
characteristics and acceptance criteria that Igloo will use to determine “Meet Spec” or
“Does Not Meet Spec” at production approval. This inspection plan will be used in
conjunction to the engineering drawings for product qualification.