User's Guide

4
What’s Included
Front Assembly Back Assembly Back Plate
Mortise Assembly
Mortise Shafts  + Pin
Strike Plates  AA Batteries x8 RFID Tags x2
Screws
Drill Sheet &
Installation Guide
RFID Stickers x2
5 Emergency Keys
X 4
X 4
X 4
X 4
X 6
X 8
Note: 1. For door frames with thickness of 40mm and above, it is
recommended to use the strike plate with an extended curved lip;
2. For doors with thickness of 40mm - 50mm, please use the shorter shaft;
for doors with thickness of 50mm - 70mm, please user the longer shaft.
Installation Guide
Outdoor
Indoor
Door
Mortise
Indoor plate
Outdoor unit
Rubber pad
Indoor unit
FH M3/16 X1/2 x4 BH M5 X 20 x4 for 40 - 50mm door BH M5 X 30 x4 for 50 - 60mm door BH M5 X 45 x4 for 60 - 70mm door PH M4 X 14 x6 FH4 X 20 x4
26mm
111mm
84mm
40mm
Door thickness:
50mm
60mm
70mm
Align this Centre Line to the
desired door thickness of
the mortise lockcase to be
inserted into door edge.
STEP 2
135mm
IGM3/4
Drill Template
32mm
(1-1/4")
Backset = 70mm (2-3/4")
54mm
Drill depth = 107mm
Place drill template on the
inside door surface. Align solid
folded line on door edge along
the top & bottom black arrows for
32mm & 70mm surface holes for
drilling from back to fron
t.
70mm
(2-3/4" )
2.5mm
Lever handle spindle centre
STEP 1
Drill Sheet size: 186mm x 240mm
For Left-hand Door
24mm
4m
8
mm