Operation Manual

Before any cleaning or maintenance, switch off the dryer.

AFTER EACH DRYING CYCLE

• Clean the lint filter at the end of every drying cycle.

• Empty the water container at the end of each drying cycle.

EACH MONTH

• Clean the heat exchanger at least every month (see “Cleaning the heat exchanger” on the next

page).

Cleaning the lint filter

Depending on the model of your dryer, the lint filter

can have different shapes.

Clean the lint filter after every drying cycle, or when

the lint filter indicator lamp lights up, proceeding as

follows:

A. Remove the completed laundry out of the dryer

before removing the lint filter.

B. Take the lint filter out of the dryer and carefully

open the filter.

C. Carefully remove the complete lint from the lint

screen.

D. If the mesh is clogged and cannot be cleaned by

hand, run the filter under water and scrub with a

soft brush.

When the lint filter is clean, put it back into the dryer.

Make sure that the lint filter is correctly positioned

before starting the next drying cycle.

NOTE

Be aware that the lint filter is always correctly positioned when laundry is put into the drum or is taken

out of it.

CLEANING AND MAINTENANCE