User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation.
7.2 Operating on the unit
1. Press [MENU] repeatedly to bring up the desired menu.
2. Conrm the selection with [ENTER].
3. Press [UP] or [DOWN] to change the respectively displayed value.
4. Press [ENTER] to apply the displayed value.
5. To exit a menu item without making changes, press [MENU].
If you don't press any button for about eight seconds, the open menu will be closed
without applying any changes.
Navigating in the menu
Operating
2bright Blind FC LED IP
23
Blinder