User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘CHMD’ . Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX mode (1, 3, 4, 6, 8, 10 or 12 channels).
Depending on the selected mode, the display shows ‘1CH’ , ‘3CH’ , ‘4CH1’ , ‘4CH2’ , ‘6CH’ ,
‘8CH’ , ‘10CH’ or ‘12CH’ .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX.
In this operating mode you select one of the automatic programmes and congure the speed
and the dimmer intensity of the automatic programme.
1. Press [MENU] repeatedly until the display shows ‘AUTO’ . Conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired automatic programme (display shows ‘PR01’ …
‘PR17’ ). Conrm with [ENTER].
3. Press [UP] or [DOWN] to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 3 Menu level 4 Description
‘Dim’ ‘000…255’ Dimmer intensity
‘Speed’ ‘000…255’ Running speed from slow to fast
4. Press [ENTER] to accept the selection.
Setting the DMX mode
Selecting and conguring auto‐
matic programmes
Operating
2bright Blind FC LED IP
25
Blinder