User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘MANL’ . Conrm with [ENTER].
2. Use [UP] or [DOWN] to select an eect or a colour that you can to adjust individually.
3. Press [ENTER] to activate a desired sub menu.
4. To set the intensity of the dimmer, the frequency of the strobe eect or the colour inten‐
sity, use [UP] or [DOWN] to select the desired value.
Display Meaning
‘Dimmer’ Dimmer intensity from 0 to 255
‘Strobe’ Colour eect from 0 Hz to 30 Hz
‘Red’ Red from 0 to 255
‘Green’ Green from 0 to 255
‘ Blue’ Blue from 0 to 255
‘White’ White from 0 to 255
5. Press [ENTER] to accept the selection.
Setting constant colour
Operating
2bright Blind FC LED IP
27
Blinder