User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘SET’ . Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DCUR’ . Conrm with [ENTER].
3. Use [UP] or [DOWN] to select the desired dimmer curve (display shows ‘LINR’ , ‘EXPO’ ,
‘LOGA’ or ‘S-Curve’ ).
Display Meaning
‘LINR’ Linear course
‘EXPO’ Exponential course
(Square curve with a at prole at the beginning and
a steep prole at the end)
‘LOGA’ Logarithmic course
(Inverted quadratic curve with a steep course at the
beginning and a at course at the end)
‘S’ S-curve shaped course
(Non-linear curve with a distinctive at course at the
beginning and end)
4. Press [ENTER] to accept the selection.
Setting the dimmer curve
Operating
2bright Blind FC LED IP
31
Blinder