User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘SET’ . Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DRES’ . Conrm with [ENTER].
3. Use [UP] or [DOWN] to select the desired response behaviour of the dimmer (display
shows ‘LED’ or ‘LAMP’ ).
Display Meaning
‘LED’ The dimmer setting for LED is activated.
‘LAMP’ The imitation of the dimming behaviour for halogen
light is activated.
4. Press [ENTER] to accept the selection.
Setting the response behaviour
of the dimmer
Operating
32
2bright Blind FC LED IP
Blinder