User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Operating on the unit
- 7.3 Menu overview
- 7.4 Functions in 1-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 4-channel DMX mode 1
- 7.7 Functions in 4-channel DMX mode 2
- 7.8 Functions in 6-channel DMX mode
- 7.9 Functions in 8-channel DMX mode
- 7.10 Functions in 10-channel DMX mode
- 7.11 Functions in 12-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Cleaning
- 11 Protecting the environment
1. Press [MENU] repeatedly until the display shows ‘SET’ . Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘LOCK’ . Conrm with [ENTER].
3. Use [UP] or [DOWN] to select either ‘On’ (keylock on) and O (keylock ‘O’ ).
4. Press [ENTER] to accept the selection.
If the key lock is activated, all keys have no function after 60 seconds. To cancel
the key lock, press simultaneously [UP] and [DOWN] for 5 seconds.
1. Press [MENU] repeatedly until the display shows ‘SET’ . Conrm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows ‘RSET’ .
3. Use [UP] or [DOWN] to select between ‘Yes’ (reset device) and ‘No’ (do not reset device).
4. Conrm with [ENTER] to apply the selection.
Enabling keylock
Resetting the device to factory
defaults
Operating
2bright Blind FC LED IP
33
Blinder