User Manual Co9 V2 LED Flood IP65 540W RGBW LED Floodlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.08.
Table of contents Table of contents 1 General information.............................................................................................................. 1.1 Further information........................................................................................................ 1.2 Notational conventions................................................................................................. 1.3 Symbols and signal words..............................................................
Co9 V2 LED Flood IP65 540W RGBW LED Floodlight
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future refer‐ ence. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED tech‐ nology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features Special features of the device: n n n n n n n n n n n n n n 36 RGBW LEDs (each 15 W) Four separately controllable LED rows Operation in stand-alone and DMX mode (7 different modes) Simple operation via display and buttons on the unit Built-in automatic show programmes Automatic colour gradients Selectable dimmer curves Repetition frequency 3000 Hz Master / Slave mode Robust aluminium housing Due to protection class IP65, operation is also possible outdoors at times W-DMX module for wi
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Installation NOTICE! Possible damage due to moisture Moisture entering into open connectors (plugs and couplers) of DMX or power cords can cause short circuits. Close unused connectors with end caps intended for this purpose (www.thomann.de). Mounting options The quick lock openings on the housing bottom are used for secure attachment of the supplied Omega brackets. Here you can attach the flight adapters (such as the supplied C-hooks).
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
Connections and controls 6 Connections and controls Front panel ö # $ % 1 Adjustable LED panel 2 Locking screw for the LED panel 3 Radio antenna 4 Control panel with display membrane button [MENU] | Activates the main menu and toggles between menu items. Closes an opened submenu. [UP] | Navigates upwards in a menu list. Increases the displayed value by one. [DOWN] | Navigates downwards in a menu list. Decreases the displayed value by one.
Connections and controls Rear panel ' 100-240V~50/60Hz PUSH & ) ( 5 [DMX IN] | DMX input (3-pin XLR chassis plug, IP65 design) 6 [DMX OUT] | DMX output (3-pin XLR chassis socket, IP65 design) 7 [POWER IN] | Lockable chassis socket (Power Twist TR1 IP65, male) for the power supply of the device 8 [POWER OUT] | Lockable chassis socket (Power Twist TR1 IP65, female) for the power supply of another device 14 Co9 V2 LED Flood IP65 540W RGBW LED Floodlight
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. The dis‐ play shows the operating mode that was selected when the unit was last powered off. If the DMX mode is set without a DMX signal being present, the display flashes.
Operating 7.2 Main menu If the display is in standby, unlock it: Successively press [UP], [DOWN], [UP], [DOWN] and [ENTER]. Press [MODE] to activate the main menu. Use the buttons [UP] or [DOWN] to select a submenu. When the display shows the desired submenu, press [ENTER] to open it. To close the main menu, press [MODE]. If you do not press any key for about 30 seconds, the main menu will be reactivated automatically.
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning 57…79 Random Ramp-down effect with increasing speed 80…102 Random strobe effect with increasing speed 103…127 Strobe-burst effect with decreasing duration of interruptions 128…250 Strobe effect with increasing speed 251…255 Open strobe ‘Red’ 0…255 Intensity red (0 % to 100 %) ‘Green’ 0…255 Intensity green (0 % to 100 %) ‘Blue’ 0…255 Intensity blue (0 % to 100 %) ‘White’ 0…255 Intensity white (0 % to 100 %) ‘Rainbow
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Colour Macro’ ‘Settings’ ‘Display Rev’ ‘Display’ 18 Co9 V2 LED Flood IP65 540W RGBW LED Floodlight 31…55 Automatic show 2 56…80 Automatic show 3 81…105 Automatic show 4 106…130 Automatic show 5 131…155 Automatic show 6 156…180 Automatic show 7 181…205 Automatic show 8 206…230 Automatic show 9 231…255 Automatic show 10 ‘Speed’ 0…255 Running speed auto‐ matic show, increasing ‘Auto Fade’ 0…255 Fade speed for
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘DMX Fail’ ‘Dimmer Curve’ ‘Dimmer Response’ ‘White Balance’ ‘Fan Set’ ‘Wireless DMX’ Device behaviour on DMX signal failure ‘Hold’ Retaining last settings ‘Blackout’ Blackout Dimmer curve ‘Linear’ Linear ‘Exp’ Exponential ‘Log’ Logarithmic ‘S Curve’ S-shaped Dimmer characteristic ‘LED’ Dimmer characteristic ‘LED’ (3 s delay) ‘Halogen’ Dimmer characteristic ‘Halogen’ (5 s delay) White balance ‘Red’ 0…255 Red propo
Operating Main menu Menu level 2 Menu level 3 Menu level 4 ‘LED Temp’ Show device temperature ‘Temp Unit’ Unit selection for device temperature Meaning ‘Temperature’ ‘Celsius’ ‘Fahrenheit’ ‘Time info’ Operating hours display ‘Power on’ Total operating hours ‘Last run hrs’ Operating hours since last power up 7.2.1 Operating mode ‘DMX’ In DMX mode, the display shows the set DMX mode in its top row and the DMX start address set in the lower part. The display flashes if no DMX signal is received.
Operating 7.
Operating Channel Value Function 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 Colour change halted 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.
Operating Channel Value Function 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.6 Functions in 3-channel DMX mode 2 Channel Value Function 1 0…255 Intensity red (0 % to 100 %) 2 0…255 Intensity green (0 % to 100 %) 3 0…255 Intensity blue (0 % to 100 %) 7.
Operating 7.
Operating Channel Value 8 Rainbow effect 9 Function 0…5 Effect off 6…21 Rainbow effect 1 22…37 Rainbow effect 2 38…53 Fading green-orange 54…69 Pulse rod-orange 70…85 Pulse blue-white 86…101 Fading blue-yellow 102…117 Rainbow effect 7 118…133 Rainbow effect 8 134…149 Rainbow effect 9 150…165 Rainbow effect 10 166…181 Rainbow effect 11 182…197 Rainbow effect 12 198…213 Rainbow effect 13 214…229 Rainbow effect 14 230…255 Rainbow effect 15 Automatic show 0…5 No automatic
Operating Channel 13 Value Function 192…255 S-shaped Special functions. Settings are enabled or retained if the corresponding DMX value is held for five seconds. 7.
Operating Channel Value Function 34…56 Ramp-up effect with increasing speed 57…79 Random Ramp-down effect with increasing speed 80…102 Random strobe effect with increasing speed 103…127 Strobe-burst effect with decreasing duration of interruptions 128…250 Strobe effect with increasing speed 251…255 Open strobe 3 0…255 Intensity red (0 % to 100 %) 4 0…255 Intensity green (0 % to 100 %) 5 0…255 Intensity blue (0 % to 100 %) 6 0…255 Intensity white (0 % to 100 %) 7 Colour macro 8
Operating Channel 9 Value Function 70…85 Pulse blue-white 86…101 Fading blue-yellow 102…117 Rainbow effect 7 118…133 Rainbow effect 8 134…149 Rainbow effect 9 150…165 Rainbow effect 10 166…181 Rainbow effect 11 182…197 Rainbow effect 12 198…213 Rainbow effect 13 214…229 Rainbow effect 14 230…255 Rainbow effect 15 Automatic show 0…5 No automatic show 6…30 Automatic show 1 31…55 Automatic show 2 56…80 Automatic show 3 81…105 Automatic show 4 106…130 Automatic show 5 131…
Operating Channel Value Function 192…255 Automatic fan speed control 14 0…255 Intensity red (0 % to 100 %), LED row 1 15 0…255 Intensity green (0 % to 100 %), LED row 1 16 0…255 Intensity blue (0 % to 100 %), LED row 1 17 0…255 Intensity white (0 % to 100 %), LED row 1 18 0…255 Intensity red (0 % to 100 %), LED row 2 19 0…255 Intensity green (0 % to 100 %), LED row 2 20 0…255 Intensity blue (0 % to 100 %), LED row 2 21 0…255 Intensity white (0 % to 100 %), LED row 2 22 0…255
Technical specifications Technical specifications 312 mm 8 Light source 36 × RGBW LED, each 15 W Optical properties Beam angle Control DMX W-DMX 515 mm Buttons and display on the unit 226 mm 117 mm 25° (with filter 40°) Number of DMX channels 2, 3, 4, 6, 13, 16 or 29 Input connections Voltage supply Power Twist IP65 DMX control XLR chassis plug, 3-pin, IP65 design Voltage supply Power Twist IP65 DMX control XLR chassis socket, 3-pin, IP65 version Output connections Power consumptio
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Symptom Remedy The unit does not work, no light Check the mains connection and main fuse. One colour does not work or the colours differ when using multiple lamps. Check the settings in the ‘White Balance’ menu. If the function is missing, values may be set to ‘000’ .
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating envi‐ ronment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
