User manual Co9Z LED Flood IP65 540W RGBW LED floodlight
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 22.05.
Table of contents Table of contents 1 General information.............................................................................................................. 1.1 Further information........................................................................................................ 1.2 Notational conventions................................................................................................. 1.3 Symbols and signal words..............................................................
Co9Z LED Flood IP65 540W RGBW LED floodlight
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future refer‐ ence. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED tech‐ nology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Features 3 Features The high-performance LED floodlight with zoom optics is particularly suitable for architectural and stage lighting. Special features of the device: n n n n n n n n n n n n n 36 × RGBW LEDs (each 15 W), background lighting: 72 × 0.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordinary microphone cables. Never connect the DMX input or output to audio devices such as mixers or amplifiers. NOTICE! Possible damage due to moisture Moisture entering into open connectors (plugs and couplers) of DMX or power cords can cause short circuits. Close unused connectors with end caps intended for this purpose (www.thomann.de).
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
Connections and controls 6 Connections and controls Overview 1 Adjustable LED panel 2 Zoom motor 3 Locking screw for the LED panel 4 Radio antenna 5 Control panel with display membrane button [MENU] Activates the main menu and toggles between menu items. Closes an opened submenu. [UP] Navigates upwards in a menu list. Increases the displayed value by one. [DOWN] Navigates downwards in a menu list. Decreases the displayed value by one.
Connections and controls Rear panel 6 [DMX IN] DMX input (3-pin XLR chassis plug, IP65 design) 7 [DMX OUT] DMX output (3-pin XLR chassis socket, IP65 design) 8 [POWER OUT] Connection supply voltage outgoing (Power Twist IP65) 9 [POWER IN] Connection supply voltage incoming (Power Twist IP65) 14 Co9Z LED Flood IP65 540W RGBW LED floodlight
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. The dis‐ play shows the operating mode that was selected when the unit was last powered off.
Operating 7.2 Main menu If the display is in standby, unlock it: Successively press [UP], [DOWN], [UP], [DOWN] and [ENTER]. Press [MODE]to activate the main menu. Use the buttons [UP] or [DOWN]to select a submenu. When the display shows the desired submenu, press [ENTER]to open it. To close the main menu, press [MODE]. The stored values are displayed in white in the display. Changed values are displayed in red until they are confirmed by [ENTER] .
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning 34…56 Ramp-up effect with increasing speed 57…79 Random Ramp-down effect with increasing speed 80…102 Random strobe effect with increasing speed 103…127 Strobe-burst effect with decreasing duration of inter‐ ruptions 128…250 Strobe effect with increasing speed 251…255 Open strobe ‘Red’ 0…255 Intensity red (0 % to 100 %) ‘Green’ 0…255 Intensity green (0 % to 100 %) ‘Blue’ 0…255 Intensity blue (0 % to 100 %) ‘White’
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Color Macro’ 18 Co9Z LED Flood IP65 540W RGBW LED floodlight 0…5 No automatic show 6…30 Automatic show 1 31…55 Automatic show 2 56…80 Automatic show 3 81…105 Automatic show 4 106…130 Automatic show 5 131…155 Automatic show 6 156…180 Automatic show 7 181…205 Automatic show 8 206…230 Automatic show 9 231…255 Automatic show 10 ‘Auto speed’ 0…255 Running speed automatic show, increasing ‘Auto Fade’ 0…255 Fade
Operating Main menu Menu level 2 Menu level 3 Menu level 4 ‘Mauve’ Mauve ‘Magenta’ Magenta ‘Pink’ Pink ‘Warm White’ Warm white ‘White’ White ‘Cold White’ Cold white Meaning ‘Settings’ ‘Display Rev’ ‘Display’ ‘DMX Fail’ ‘Dimmer Curve’ ‘Dimmer Response’ ‘White Balance’ Calibrate Display inversion ‘ON’ On, display is rotated by 180° ‘OFF’ Off, normal display Automatic display shutdown when not in use ‘ON’ Enabled ‘OFF’ Disabled Device behaviour on DMX signal failure ‘Hold’ Re
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Fan Set’ ‘Wireless DMX’ ‘Test’ ‘Factory Reset’ ‘Key lock’ Fan speed ‘Auto’ Automatic fan speed control ‘High’ Fan speed constantly high Wireless DMX control ‘No’ Disabled ‘Yes’ Enabled Function tests ‘ALL’ Testing all functions ‘Zoom’ Testing zoom motor ‘BEAM LED’ Testing beam LEDs ‘Ground LED’ Testing background LEDs Reset to factory defaults ‘OFF’ Turned off ‘ON’ Starting Key lock ‘OFF’ Turned off ‘ON’ Ena
Operating 7.2.2 Operating mode ‘Slave’ In Slave mode, the display shows in the lower part ‘Operating Mode: SLAVE’ . The dis‐ play flashes if no control signal is received. 7.2.
Operating 7.3 Menu overview 7.
Operating Channel Value Function 14…21 Amber 22…29 Yellowish-amber coloured 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.
Operating Channel Value Function 22…29 Yellowish-amber coloured 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.
Operating Channel Value Function 4 0…255 Intensity blue (0 % to 100 %) 5 0…255 Intensity white (0 % to 100 %) 7.
Operating Channel 9 Value Function 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Dimmer curve 10 0…5 No function 6…63 Linear 64…127 Exponential 128…191 Logarithmic 192…255 S-shaped Special functions. Settings are enabled or retained if the corresponding DMX value is held for five seconds.
Operating Channel Value Function 6 0…255 Intensity red (0 % to 100 %), LED row 2 7 0…255 Intensity green (0 % to 100 %), LED row 2 8 0…255 Intensity blue (0 % to 100 %), LED row 2 9 0…255 Intensity white (0 % to 100 %), LED row 2 10 0…255 Intensity red (0 % to 100 %), LED row 3 11 0…255 Intensity green (0 % to 100 %), LED row 3 12 0…255 Intensity blue (0 % to 100 %), LED row 3 13 0…255 Intensity white (0 % to 100 %), LED row 3 14 0…255 Intensity red (0 % to 100 %), LED row 4 1
Operating Channel Value Function 5 0…255 Intensity red (0 % to 100 %) 6 0…255 Intensity green (0 % to 100 %) 7 0…255 Intensity blue (0 % to 100 %) 8 0…255 Intensity white (0 % to 100 %) 9 Colour macro 10 28 0…5 Blackout 6…13 Red 14…21 Amber 22…29 Yellowish-amber coloured 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function
Operating Channel 11 Value Function 102…117 Rainbow effect 7 118…133 Rainbow effect 8 134…149 Rainbow effect 9 150…165 Rainbow effect 10 166…181 Rainbow effect 11 182…197 Rainbow effect 12 198…213 Rainbow effect 13 214…229 Rainbow effect 14 230…255 Rainbow effect 15 Automatic show 0…5 No automatic show 6…30 Automatic show 1 31…55 Automatic show 2 56…80 Automatic show 3 81…105 Automatic show 4 106…130 Automatic show 5 131…155 Automatic show 6 156…180 Automatic show 7 18
Operating Channel Value Function 56…105 Dimmer characteristic ‘Halogen’ (5 s delay) 106…155 Fan speed constantly high 156…205 Automatic fan speed control 206…255 Reset 16 0…255 Dimmer background colour (0 % to 100 %) 17 0…255 Stroboscope effect background colour with increasing speed (0 % to 100 %) 18 0…255 Background intensity red (0 % to 100 %) 19 0…255 Background intensity green (0 % to 100 %) 20 0…255 Background intensity blue (0 % to 100 %) 21 Colour macro background 30 0…
Operating 7.
Operating Channel 10 11 32 Value Function 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Rainbow effect 0…5 Effect off 6…21 Rainbow effect 1 22…37 Rainbow effect 2 38…53 Fading green-orange 54…69 Pulse rod-orange 70…85 Pulse blue-white 86…101 Fading blue-yellow 102…117 Rainbow effect 7 118…133 Rainbow effect 8 134…149 Rainbow effect 9 150…165 Rain
Operating Channel Value Function 181…205 Automatic show 8 206…230 Automatic show 9 231…255 Automatic show 10 12 0…255 Running speed automatic show, increasing 13 0…255 Automatic Fade effect 14 Dimmer curve 15 0…5 No function 6…63 Linear 64…127 Exponential 128…191 Logarithmic 192…255 S-shaped Special functions. Settings are enabled or retained if the corresponding DMX value is held for five seconds.
Operating Channel Value Function 30 0…255 Intensity blue (0 % to 100 %), LED row 4 31 0…255 Intensity white (0 % to 100 %), LED row 4 32 0…255 Dimmer background colour (0 % to 100 %) 33 0…255 Stroboscope effect background colour with increasing speed (0 % to 100 %) 34 0…255 Background intensity red (0 % to 100 %) 35 0…255 Background intensity green (0 % to 100 %) 36 0…255 Background intensity blue (0 % to 100 %) 37 Colour macro background 34 0…5 Blackout 6…13 Red 14…21 Amber
Technical specifications 8 Technical specifications Light source 36 × RGBW LEDs (each 15 W), background lighting: 72 × 0.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Symptom Remedy The unit does not work, no light Check the mains connection and main fuse. One of the colours does not work or the colours Check the settings in the “White Balance” menu. Values may be set to ‘000’ differ when using several lamps. when no function is available.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating envi‐ ronment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 40 Co9Z LED Flood IP65 540W RGBW LED floodlight
Notes Co9Z LED Flood IP65 540W RGBW LED floodlight 41
Notes 42 Co9Z LED Flood IP65 540W RGBW LED floodlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
