User manual WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 08.10.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 Functions in 9-channel DMX mode........................................................................................... 56 4 8 Technical specifications....................................................................................................................... 62 9 Plug and connection assignment.................................................................................................... 68 10 Troubleshooting...................................................
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR 5
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ .
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord).
Safety instructions DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside.
Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Risk of burns The surface of the device can become very hot during operation. Do not touch the device with bare hands during operation, and after switching off wait for at least 15 minutes.
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
Safety instructions NOTICE! Fire hazard due to exceedance of the maximum current The device can power other devices. The current consumption of all serially con‐ nected other devices must not exceed the values indicated in the technical speci‐ fications, otherwise you risk injuries and irreparable damages of the device. Connect just so many devices to the output socket that the maximum current consumption is not exceeded.
Features 3 Features Splash-proof LED par, ideal for ambient lighting outdoors, for lighting buildings and stages. Special features of the device: n n n n n n n n Item no. 474388: 3 × 4-in-1 LEDs (RGBW, 10 W each) Item no.
Features Remote Device Management (RDM) The device supports RDM protocol communication (Remote Device Management) according to ANSI / ESTA E1.20. It can exchange information with an RDM-compatible controller. Also observe the instruction manual of the controller. Information about protection class IP65 Equipment with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against splash water from any angle (second code digit).
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must not exceed the limits stated in the chapter Tech‐ nical Specifications of the User Manual. NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. NOTICE! Possible damage due to moisture Moisture entering into open connectors (plugs and couplers) of DMX or power cords can cause short circuits. Close unused connectors with end caps intended for this purpose (www.thomann.de).
Installation Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings provided on the twopiece bracket for attaching. Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode 26 When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and controls 6 Connections and controls WAL-L310 Par (Item number 474388) WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR 27
Connections and controls 1 Locking screws for the brackets. 2 Two-piece bracket for hanging or floor setup 3 Omega bracket with quick lock 4 LED 5 Infrared sensor for optional remote control 6 Safety cable eyelet. 7 Display and keypad [MODE] Activates the main menu, toggles between the menu levels or closes a submenu. [DOWN] Decreases the displayed value by one. [UP] Increases the displayed value by one.
Connections and controls [SET] Confirms a value.
Connections and controls WAL-L710 Par (Item number 474390), WAL-L710 Par W-DMX (Item number 477173) 30 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR
Connections and controls 1 Locking screws for the brackets. 2 Two-piece bracket for hanging or floor setup 3 Omega bracket with quick lock 4 LED 5 Infrared sensor for optional remote control 6 Safety cable eyelet. 7 Display and keypad [MODE] Activates the main menu, toggles between the menu levels or closes a submenu. [DOWN] Decreases the displayed value by one. [UP] Increases the displayed value by one.
Connections and controls [SET] Confirms a value.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The currently set operating mode, version and temperature are displayed. The device is operational. If no button is pressed within 30 seconds, the screen is automatically locked. To lock the screen manually, press [MODE] and [SET] simultaneously for 3 seconds. 7.2 Operating on the unit Navigating in the menu 1. Press [MODE] to activate the main menu. 2.
Operating 34 3. Press again [MODE] to call up further menu items. 4. To activate the respectively shown menu item, press [SET]. 5. To return to the previous menu level without change, press [MODE].
Operating Setting the DMX address 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Address:’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select a value between ‘001’ and ‘512’ . Confirm with [SET]. This setting is only relevant when the device is controlled via DMX. Make sure that this number matches the configuration of your DMX controller.
Operating Setting the DMX mode 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Channels:’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the desired DMX mode (4, 6 or 9 channels). Depending on the selected mode, the display shows ‘4-CH’ , ‘6-CH’ or ‘9-CH’ . Confirm with [SET]. This setting is only relevant when the device is controlled via DMX. Enabling the W-DMX mode (available only for item no.
Operating Connecting the W-DMX mode (available only for item no. 477173 Ignition WAL-L710 Par W-DMX) 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘W-DMX Unlock:’ to disconnect the device from a transmitter and to establish the connection to another transmitter. Confirm with [SET]. 3. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Confirm with [SET]. ð The unit now operates in W-DMX mode. 4.
Operating Activating Slave mode 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Slave’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Confirm with [SET]. ð The device is now working in slave mode, i.e. it will exactly copy the movement of the controlling master device, correct wiring provided. 3. To deactivate slave mode, select ‘No’ . Confirm with [SET]. This setting is only relevant if the device is not controlled via DMX.
Operating Activating automatic pro‐ gramme sequence 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘AUTO’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Confirm with [SET]. ð Automatic programme sequence is activated. Automatic programmes 2 to 17 run with the preset settings. 3. To deactivate automatic programme sequence, select ‘No’ . Confirm with [SET]. 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Confirm with [SET]. 2.
Operating Configuring an automatic pro‐ gramme: Static colour This setting can only be made for the automatic programme ‘Mode:01’ . 40 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Color’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select a value between ‘00’ and ‘39’ to set the static colour. 4. Press [SET] to accept the selection.
Operating Configuring an automatic pro‐ gramme: Running speed This setting can only be made for the automatic programmes ‘Mode:02’ bis ‘Mode:17’ . 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Speed’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select a value between ‘001’ (slow) and ‘100’ (fast) to set the speed of the programme sequence. 4. Press [SET] to accept the selection. 1.
Operating Setting the dimmer 42 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Dimmer’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the colour whose intensity you want to adjust (display shows ‘Red’ , ‘Green’ , ‘Blue’ , and ‘White’ ). Confirm with [SET]. 3. Use [UP] or [DOWN] to select a value between ‘000’ (LEDs off) and ‘255’ (full brightness) to adjust the brightness of the LEDs. 4. Press [SET] to accept the selection.
Operating Selecting the dimmer curve 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Curves Select’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the desired dimmer curve. The following table shows the available options. 4.
Operating Selecting the dimmer response 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Dimmer Speed’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the desired setting for the dimmer response. The following table shows the available options. 4. 44 Menu level 2 Menu level 3 Function ‘Dimmer Speed’ ‘Fast’ Fast dimming ‘Smooth’ Slow dimming Press [SET] to accept the selection.
Operating Rotating the display 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Display’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the desired display orientation. The following table shows the available options. 4. Menu level 2 Menu level 3 Function ‘Display’ ‘Normal’ The display is not inverted. ‘Inverted’ The display is inverted by 180°. Press [SET] to confirm the selection.
Operating Setting the LED repetition rate (PWM) 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘PWM Frequency’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to set the value of the LED repetition rate. The following table shows the available options. 4.
Operating Setting the behaviour on DMX control failure 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘DMX Fail’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the device behaviour on DMX signal failure. The following table shows the available options. 4. Menu level 2 Menu level 3 Function ‘Dmx Fail’ ‘Off’ If the DMX control fails, the device is blacked out.
Operating Activating / deactivating DMX synchronization With DMX synchronization you can synchronize the settings of the device with those of other DMX-controlled devices. 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Dmx Sync’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select ‘On’ in order to activate DMX synchronization. Confirm with [SET]. 4.
Operating Resetting the device to factory defaults 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Factory Reset’ . Confirm with [SET]. 3. Use [UP] or [DOWN] to select the menu item ‘Yes’ to reset the device to factory defaults or select the menu item ‘NO’ to retain the stored settings. 4. Press [SET] to accept the selection.
Operating Showing the software version and the device temperature 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Information’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘Version’ . Confirm with [SET]. ð The display shows the current software version and the current device temperature. NOTICE! Switch off the device if the device temperature is outside the permis‐ sible range. 3. 50 Press [MODE] to close the menu.
Operating Showing the operating hours 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Information’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘PowerTime’ . Confirm with [SET]. ð The display shows the hours which the device has been connected to the power supply. 3. Press [MODE] to close the menu. 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Information’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘LED Time’ .
Operating RDM function This device has an RDM function and supports the DMX512 standard. Any device with RDM can be recognized by the built-in UID code. 1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Information’ . Confirm with [SET]. 2. Use [UP] or [DOWN] to select the menu item ‘UID’ . Confirm with [SET]. ð The display shows the UID code. 3. Press [MODE] to close the menu.
Operating Parameter ID Recognition command Sent Command Received Command DMX_START_ADDRESS * * IDENTIFY_DEVICE * * SUPPORTED_PARAMETERS * SENSOR_DEFINITION * SENSOR_VALUE * DMX_PERSONALITY * DMX_PERSONALITY_DESCRIPTION * * RESET_DEVICE * FACTORY_DEFAULTS * WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR 53
Operating 7.
Operating 7.4 Functions in 4-channel DMX mode Channel Value Function 1 000…255 Intensity red (0 % to 100 %) 2 000…255 Intensity green (0 % to 100 %) 3 000…255 Intensity blue (0 % to 100 %) 4 000…255 Intensity white (0 % to 100 %) 7.
Operating Channel Value Function 4 000…255 Intensity blue (0 % to 100 %) 5 000…255 Intensity white (0 % to 100 %) 6 Strobe effect 000…010 open 011…255 Strobe with increasing frequency 7.
Operating Channel Value Function 4 000…255 Intensity blue (0 % to 100 %) 5 000…255 Intensity white (0 % to 100 %) 6 Preset colour 000…015 Without function 016…021 R(255)G(000)B(000)W(000) 022…027 R(255)G(015)B(000)W(000) 028…033 R(255)G(050)B(000)W(000) 034…039 R(255)G(125)B(000)W(000) 040…045 R(255)G(170)B(000)W(000) 046…051 R(255)G(210)B(000)W(000) 052…057 R(255)G(255)B(000)W(000) 058…063 R(200)G(255)B(000)W(000) 064…069 R(160)G(255)B(000)W(000) WAL-L310 Par, WAL-L710 Par, W
Operating Channel 58 Value Function 070…075 R(110)G(255)B(000)W(000) 076…081 R(070)G(255)B(000)W(000) 082…087 R(000)G(255)B(000)W(000) 088…093 R(000)G(255)B(010)W(000) 094…099 R(000)G(255)B(025)W(000) 100…105 R(000)G(255)B(040)W(000) 106…111 R(000)G(255)B(070)W(000) 112…117 R(000)G(255)B(120)W(000) 118…123 R(000)G(255)B(255)W(000) 124…129 R(000)G(100)B(255)W(000) 130…135 R(000)G(000)B(255)W(000) 136…141 R(020)G(000)B(255)W(000) 142…147 R(050)G(000)B(255)W(000) WAL-L310 Par, WA
Operating Channel Value Function 148…153 R(080)G(000)B(255)W(000) 154…159 R(130)G(000)B(255)W(000) 160…165 R(180)G(000)B(255)W(000) 166…171 R(225)G(000)B(255)W(000) 172…177 R(255)G(000)B(255)W(000) 178…183 R(255)G(000)B(220)W(000) 184…189 R(255)G(000)B(070)W(000) 190…195 R(255)G(000)B(020)W(000) 196…201 R(255)G(000)B(007)W(000) 202…207 R(000)G(000)B(000)W(255) 208…213 R(255)G(000)B(000)W(255) 214…219 R(125)G(000)B(000)W(255) 220…225 R(000)G(255)B(000)W(255) WAL-L310 Par, WAL-L7
Operating Channel 7 60 Value Function 226…231 R(000)G(120)B(000)W(255) 232…237 R(000)G(000)B(255)W(255) 238…243 R(000)G(000)B(100)W(255) 244…255 R(000)G(000)B(050)W(255) Programmes 000…015 Without function 016…030 Programme 2 031…045 Programme 3 046…060 Programme 4 061…075 Programme 5 076…090 Programme 6 091…105 Programme 7 106…120 Programme 8 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR
Operating Channel Value Function 121…135 Programme 9 136…150 Programme 10 151…165 Programme 11 166…180 Programme 12 181…195 Programme 13 196…210 Programme 14 211…225 Programme 15 226…240 Programme 16 241…255 Programme 17 8 000…255 Speed from slow to fast (programmes 2 to 17) 9 Strobe effect 000…010 open 011…255 Strobe with increasing frequency WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR 61
Technical specifications 8 62 Technical specifications WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR
Technical specifications Item no. 474388 474390 477173 Light source 3 × 4in1 RBGW LED, 10 W each 7 × 4in1 RBGW LED, 10 W each 7 × 4in1 RBGW LED, 10 W each Optical properties Beam angle 10° (without filter) Colour temperature 6500 K Luminous flux max. 1442 lm max.
Technical specifications Item no. Output connections Voltage supply 474388 474390 Power cord with Power Twist TR1 cable connector Lockable output socket Power Twist TR1 IP65 Output current max. 6A DMX control 477173 Output current max.
Technical specifications Item no.
Technical specifications Further information Item no. 474388 474390 477173 Construction Outdoor housing, Flat PAR Outdoor housing, Flat PAR Outdoor housing, Flat PAR Number of LEDs 3 7 7 Colour mixture RGBW RGBW RGBW LED type x-in-1 x-in-1 x-in-1 Floor housing Yes Yes Yes Fanless Yes Yes Yes Remote control optional optional optional Wireless DMX No No Yes Housing colour black black black Barn door (item no. 477996) Barn door (item no.
Technical specifications Item no. 474388 474390 477173 Diffusion filter 25° (item no. 476828) Diffusion filter 25° (item no. 476832) Diffusion filter 25° (item no. 476832) Diffusion filter 40° (item no. 476830) Diffusion filter 40° (item no. 476831) Diffusion filter 40° (item no.
Plug and connection assignment 9 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR 73
Notes 74 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX LED PAR
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
