Operation Manual

12
2.2 Buttons and other controls on the screen
When you are using IGO 8, you usually tap buttons on the touch screen.
You only need to confirm selections or changes in IGO 8 if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings. Otherwise,
IGO 8 saves your selections and applies the new settings without confirmation as soon as you use
the controls.
Type Example Description How to use it
Button
Tap it to initiate a function,
to open a new screen, or
to set a parameter.
Tap it once.
Icon
Shows status information.
Some icons also function as a button.
Tap them once.
List
When you need to select
from several options, they
appear in a list.
Move between pages with the
and
buttons and tap the value
that you want.
Slider
When a feature has
several different unnamed
values, IGO 8 shows an
indicator on a gauge that
displays and sets a value
from a range.
• Drag the handle to move the
slider to its new position.
• Tap the slider where you want
the handle to appear; the
thumb jumps there.
Switch
When there are only two
choices, a checkmark
shows whether the feature
is enabled.
Tap it to turn the switch on or off.