Operation Manual

44
3.2 Creating a multi-point route (inserting a via point)
Multi-point routes are created from simple routes, so a route must be active first. One of the ways of
expanding the route is to keep the destination, and to add via points (intermediate destinations).
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This will be the additional destination
in the route.
2. The map appears with the selected point in the middle, and the Cursor menu opens
automatically.
3. Tap
to add the point as an intermediate destination preceding the final
destination of the route.
4. [optional] To add more points to the route, repeat the above steps as many times as you like.
If you insert a via point in a route that is already a multi-point route, you will automatically be taken to
the Edit Route screen where you can determine the position of the intermediate route point. When
you enter the screen, the new via point is placed as the first via point to be reached. The new point is
the highlighted point in the list.
You have the following options:
Button Action
The selected point moves up in the list (becomes a via point to be reached
earlier). Tap this button repeatedly, and the point becomes the start point of the
route (when routing from a given location) or the first via point to reach (when
routing from the GPS position).
The selected point moves down in the list (becomes a via point to be reached
later). Tap this button repeatedly, and the point becomes the final destination of
the route.
Tap this button to reverse the route. The start point becomes the destination,
the destination becomes the start point, and all via points are to be reached in
the opposite order than before.
Tap this button to optimise the route. The start point and the destination remain
at their position, but the via points are reordered to make the shortest possible
route.
Tap this button to remove the selected point from the route. The route remains
as it was before adding the new point.
Every time a new point is added, the route is recalculated automatically, and you can start navigating
right away.
3.3 Creating a multi-point route (appending a new destination)
destination Multi-point routes are created from simple routes, so a route must be active first. One of
the ways of expanding the route is to add a new destination. The previous destination becomes the
last via point of the route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This will be the additional destination
in the route.
2. The map appears with the selected point in the middle, and the Cursor menu opens
automatically.