Operation Manual

86
4.5.10 Device settings
You can fine-tune device related settings in this menu. Tap the following buttons: , ,
.
Button Description
Power Management
You can set how the backlight will behave when the screen has not been
touched for a while. You have the following options:
• Backlight Always On: The screen is continuously lit.
• Use Device Settings: The backlight settings of the device will be
applied in IGO 8.
• Smart: When running on battery, Smart Powersave will light up the
screen only when you press a button, tap the screen, or if there is
something to show you. After a few seconds the light level decreases,
and after another few seconds the backlight turns off. This helps
achieve a longer battery life.
Backlight at Daytime
You can set the backlight level for daytime use.
Backlight at Night You can set the backlight level for night use.
Autorun Enabled You can instruct the PDA to automatically run IGO 8 when the memory card
is inserted.
Set Screen Orientation You can change the orientation of the screen when running IGO 8. Screen
orientation can follow the current orientation of the PDA, or you can set a
fixed orientation that is independent of the PDA settings.