User Manual

ManualsBrandsiGuardStove ManualsHome AudioPlug-in Electric Range Monitor

User & Online Features Manual

For Electric Stoves

In order to take advantage of these features your

iGuardStove

must first be connected to your

home’s wireless Wi-Fi router and connected to your

iGuard

Online Account.

Please go to page 6 of this manual and follow the instructions on how to connect your

iGuardStove.

TABLE OF CONTENTS

Getting Started

Page 1

Basic Install & Specifications

Page 2

Quick Install

Page 3

Wireless Setup

Page 3

Device Menu Options

Page 4

Operating the iGuardStove

Page 5

ONLINE FEATURES

Home Page Page 6

Audio Visual Reminders Page 6

Add your

iGuardStove

to your Online Account Page 6

Identification Page 6

Auto Shut Off Timer Page 7

Manual Timer Page 7

Child Lock Page 7

Late Night Lock Page 8

Caregiver Lock Page 8

Additional Features Page 8

Shut Off Odometer Page 8

Room Temperature Alerts Page 9

History Calendar View Page 9

History Daily View Page 10

Activity Monitors – Daytime & Nighttime Page 10 & 11

Contacts List Page 11

Commercial Account Add a Manager Page 12

Manager Permission Page 12

Manager Permission (cont.) Page 13

What’s in the Box

1- Control Panel 1- Power

Box

1- Network Cable

& Ferrite donut

2- Screws

15” of Wire

Channel

WARNING

The iGuardStove must ONLY be connected to a 125-250 VAC grounded 4 prong range wall

outlet.

CAUTION

Do not mount control panel:

• Directly above the heat source where hot air or steam will come in contact

• On or above a microwave or toaster oven

• Directly on or above the stove

INSTALLATION REQUIREMENT

No electrician is required to install the device and only a Philips screwdriver is needed to mount

the Control Panel.

Operating Note:

Hidden Caregiver Lock - If you press and hold the middle button for 5 seconds the device will

completely lock you out from all use. To unlock lock it press and hold the the button for 5 seconds

again. You can use this to take control of the device so only you can activate the stove. Activate

this feature while no one is watching you, as you do not want them to figure out how to defeat this.

Menu Lock - There is also an option to LOCK access to the Menu. Please contact us and we will email

you instructions. We didn’t want to put the code in this manual in case it gets discovered by curious

eyes.

IMPORTANT

Read This Manual Before Installing

When properly cared for, your new iGuardStove has been designed to be safe and reliable.

Do not disassemble any of the components. There are no user serviceable parts inside.

Note:

The iGuardStove electric models were tested at above rated amperage and 115% above

rated voltages non-stop for 30,000 cycles over a period of 1.5 days straight while in a constant

71C/160F ambient temperature.

Getting Started

Summary of content (14 pages)

PAGE 1
Getting Started User & Online Features Manual IMPORTANT Read This Manual Before Installing When properly cared for, your new iGuardStove has been designed to be safe and reliable. Do not disassemble any of the components. There are no user serviceable parts inside. For Electric Stoves In order to take advantage of these features your iGuardStove must first be connected to your home’s wireless Wi-Fi router and connected to your iGuard Online Account.
PAGE 2
Basic Install Layout & Specifications Control Panel Power Box This is a pictorial of how the gas iGuardStove will install into the stove’s electrical and cupboards. 1. 2. 3. 4. 5. 6. 7. Gas Sensor – This sensor looks for unburned gas and will immediately shut off the valve, Record an online event and send a text alert.
PAGE 3
Quick Install Guide Wireless Setup WARNING (A) WI-FI WPS AUTOMATIC CONNECTION For newer routers you can use the very simple WPS (Wi-Fi Protected Setup) feature. Simply press and hold the Menu Button for 2 seconds to enter into the Menu and down to Wireless Setup and then chose Connect with WPS option. Ensure that the stove is off and fully cooled down. Turn off the stove’s main breaker. 1. Pull the stove away from the wall and unplug stove from wall outlet.
PAGE 4
Device Menu Options Handy Tip: To access the settings press and hold the Menu button for 2 seconds The iGuardStove works best when motion sensor has the best view of the highest traffic area in the kitchen. Mount the control panel on the busiest side of the stove. Handy TIP: There is a way for you to LOCK the Menu from unwanted access. It involves a sequence of button presses to unlock it. We don’t put those instructions in this manual to prevent curious minds from discovering the secret.
PAGE 5
Online Features Operating the iGuardStove Register a New Account BUTTON NAMES To Register or Open your new account go to https://manage.iguardfire.com where you will see this screen example below. Just fill in the information and then choose “Register” at the bottom. Button names are found above the button on the LCD screen and are called “Situational” meaning that one time the button may be labelled as a “Back” button and in a different situation it may be labelled “Reset”.
PAGE 6
Home Page Add Your iGuardStove to Your Online Account Below is a sample of your Home page. This sample is named Bill’s Home page and he has 3 iGuardStoves added to his account. Each line will show from left to right the • The name that you gave the the stove. • The colored icon showing the current status or last action of the stove. • The name of that status or last action. • Then 3 page buttons named History, Settings and Alerts & Contacts.
PAGE 7
Auto Shut Off Timer Child Lock The Auto Shut Off Timer value is the amount of time you can be away from the cooking area before the iGuardStove will shut off the stove automatically. The default from the factory is 5 minutes. You can adjust it anywhere between 1 to 15 minutes. Please keep in mind that a lot can happen when your cooking is allowed to run unattended even for even 5 minutes so keep the time shorter rather than longer. Once this is set you won’t need to adjust it.
PAGE 8
Late Night Lock Additional Features This feature allows you to disable the stove during certain hours of certain days of the week. This will prevent someone from waking at 3am and then deciding to cook everyone breakfast and then falling back asleep with the stove left on. There are 2 additional settings: 1. Safety Lock – This will completely disable the stove from all use until you decide to relinquish control back to the user in the kitchen. 2.
PAGE 9
Room Temperature Alerts History – Calendar View The temperature sensor is designed to warn you if the ambient temperature in the kitchen area is getting to dangerous levels either too high or too low. This can alert you that maybe the furnace has quit and the pipes are at risk of freezing or that the air conditioner has failed and the house is too hot and your loved one needs to be removed from the home immediately.
PAGE 10
History – Daily View Activity Monitor - Daytime The Daily List of Events is very handy way to determine how people are interacting with the stove. This is important as peoples memories change and can give you insights as to their activities that no other device can. The Daytime and Nighttime Activity Monitors help you keep an eye on what's happening in the heart of the home. We’ve heard of loved ones falling and unable to get up and going hours or days before being discovered.
PAGE 11
Activity Monitor - Nighttime Contacts List – (Family, Friends & Care workers) The Nighttime Monitor settings: The Nighttime monitoring starts at the “Sleep Time” and ends at the “Wake Time”. During the Nighttime the system will simply record motion that it sees. This can help you determine if there are any sleep irregularities with your loved one. This area manages your Contacts List of who you want to receive which Alerts. They WILL NOT have access to settings. (See Managers in next column.
PAGE 12
Commercial Account-Add a Manager Managers Permissions With your Commercial Account you have the ability to add Managers who will have their own access to the stoves and their settings. Managers can have access to settings where a normal Contact can’t. The main profile is the account owner and the list of Managers is below that. In this example Logan has been added as a Manager When you click into Logan’s settings you can choose what to give him access to.
PAGE 13
Limited Warranty Managers Permissions (cont.) 1. iGuardFire Ltd. warrants, to the original purchaser, this product against defects in materials workmanship for a period of one (1) year from the date of original purchase. During this period iGuardFire Ltd. will repair or replace a defective product or part, at their discretion, with a new or refurbished product at no charge other than shipping costs. Here is a better look at the permissions settings for a Manger.
PAGE 14
Refund & Return Policy We do not accept returns or exchanges unless the item you purchased is defective. If you receive a defective item, please contact us at sales@iGuardFire.com or 844-859-3838 with details of the product and the defect. An RMA# and shipping instructions will be given to you at that point.